ADDITIONAL FEATURES
17
The timer, time display and panel lock
Stereo/bilingual transmissions
If you press the
F
button and the
t
button on the
remote control whilst watching a normal TV broadcast,
you will see a very accurate time display showing the
hour, minute and seconds, appear in the top right corner
of the screen.
It will remain on the screen for about 5 seconds.
1
The Timer
Panel lock
allows you to disable the buttons on the front
of the TV set so that channels cannot be changed. You
can though, still use the buttons on the remote control.
From the
FEATURE MENU
select
Panel lock
and choose
ON
or
OFF
with the
S
and
R
buttons.
You can tell the TV to turn itself
ON
or
OFF
after a
certain time.
The time display facility allows you to see the current
time on the TV screen.
EXIT
: To exit
Panel Lock
The Time Display
When
Panel lock
is
ON
,
you will be reminded on
the screen when you
press any of the front
panel buttons.
Select the
TIMER
option from the top menu bar.
Select the
Off timer
(or the
On timer
). If, for
example, you want the TV to turn OFF (or ON) in
one and a half hours time, enter 01:30 using the
numbered buttons on the remote control.
When setting the
On timer
, you must enter the
programme position number you want to watch.
You must put the set into Standby mode by
pressing the
i
button.
When the
On timer
has been set, the GREEN On
timer indicator on the front of the TV will be lit
(see page 5)
.
1
2
3
Off timer
01:30
On timer
00:00 P02
0-9 :
To
set
EXIT
: To exit
TIMER
If the
On timer
has been set, you do not have
to wait for the time period to elapse before
being able to watch the television. You can
bring the set back to life by pressing the
i
button. However, the GREEN timer light will
stay on until the set time period has passed.
Stereo
…
1
…
and Bilingual
Bilingual transmissions are rare.
If they
are
transmitted the word
Dual
will display.
If the word
Dual
does
appear press the
O
I/II
button to select between
Dual 1
,
Dual 2
and
mono
.
1
2
Stereo and Bilingual transmissions…
If Nicam or dual language broadcasts are transmitted
the word
Stereo
or
Dual
will appear on the screen,
disappearing after a few seconds.
The display will reappear each time you change programme
positions, provided that the broadcast is in stereo. If the
broadcast is
not
in stereo the word Mono will appear.
Choose the required programme number.
Press the
O
I/II
button repeatedly, to select
between
Stereo
and
Mono
.
NICAM broadca
sts can be
in either Stereo o
r Mono.
With
Panel lock
ON, once the TV has been turned off using
the ON/OFF button on the front of the TV, the T
V can only be
viewed again after switching on with the ON/O
FF button and
then pressing the Standby button
i
on the remote control.
FEATURE MENU
AV connection
Picture size/position
Teletext
Language
ENGLISH
Panel lock
OFF
WSS
ON
Blue screen
ON
