Toshiba 30H83, Service Manual

– 15 –

GENERAL ADJUSTMENTS

ADDING CHANNELS TO THE TV’S MEMORY

SPECIFIC INFORMATIONS

Programming channels automatically

Your TV can automatically detect all active channels in your
area and store them in its memory. After the channels are
stored automatically, you can manually add or erase
individual channels (see “Adding and erasing channels
manually,” below).

To program channels automatically:

1

Press MENU, and then press 

;

 ( ) or 

:

 ( ) until the

SET UP menu appears.

2

Press 

8

 ( ) or 

9

 ( ) until the TV/CABLE is highlighted.

3

Press 

;

 ( ) or 

:

 ( ) to highlight either TV or CABLE,

depending on which you use. If you use an antenna,
highlight TV; if you use cable, highlight CABLE.

4

Press 

9

 ( ) to select CH PROGRAM.

5

Press 

;

 ( ) or 

:

 ( ) to start channel programming. The

TV will
automatically cycle through all the TV or Cable channels
(depending on which you selected), and store all active
channels in the channel memory.
While the TV is cycling through the channels, the
message “Programming Now—Please Wait” appears.

6

When channel programming is complete, the message
“Completed” appears.

7

Press Channel 

8

 ( ) or 

9

 ( ) to view the programmed

channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you
can manually add or erase specific channels.

To add or erase channels:

1

Select the channel you want to add or erase. If you are
adding a channel, you must select the channel using the
Channel Number buttons.

2

Press MENU, and then press 

;

 ( ) or 

:

 ( ) until the

SET UP menu appears.

3

Press 

8

 ( ) or 

9

 ( ) to highlight ADD/ERASE.

4

Press 

;

 ( ) or 

:

 ( ) to select ADD or ERASE, depend-

ing on the function you want to perform.

5

Repeat steps 1-4 for other channels you want to add or
erase.

Using the Quick Connect Guide

The Quick Connect Guide automatically starts the first time
the TV is turned on.
You can change the current settings any time.

1

Press MENU, and then press 

;

 or 

:

 until the SET UP

menu appears.

2

Press 

8

 or 

9

 to highlight “QUICK CONNECT GUIDE”.

3

Press 

;

 or 

:

 to enter the Quick Connection Guide

mode.
Advance the setup according to the guide displayed on
the screen.
You can set up the following items.

On-screen display language selection

Cable box selection (Yes/No)

Cable box connection

Cable box output channel selection

(ch3/ch4)

Select channels using Cable box

(Confirmation only)

Clock setting

Picture mode selection

Basic setup has been completed

Cable or Antenna connection

TV (antenna)/Cable source selection

Automatic channel programming

Yes

No

When you press Channel 

8

 ( ) or 

9

 ( ), your TV will stop only on the channels stored in the TV’s channel memory.

Follow the steps below to program all active channels into the TV’s memory.