Connecting Hardware Devices
Memory modules
69
Removing a memory module
1
If the server is in operation, shut it down. Then remove the access panel. For
detailed instructions, read steps 1 through 5 in
Maintenance overview
on page 53.
2
Press the levers securing the memory module away from the module, then lift the
memory module from the connector.
Removing a memory module
3
If necessary, rearrange the memory modules so that the first module is in the lowest
numbered memory slot—starting with slot 1 through slot 4. If the memory modules
are of different capacities, place them in order of increasing capacity. Install the
memory module with the smallest capacity in slot 1.
4
Replace the memory slot cover, if available.
5
Reinstall the access panel, reconnect all signal and power cables, then turn on the
server. For instructions, read steps 7 through 10 in
Maintenance overview
on page
53.
CAUTION: Removing a memory module while the server is on could cause damage
to the server or the memory module.
Memory modules can be seriously damaged by static electricity. Wear a wrist or
heel ground cable to discharge static electricity carried on your body. If such
equipment is not available, touch a grounded metal object to discharge static
electricity before working on sensitive electronic components.
HINT: Handle the module with care. Occasionally, the memory module may pop out
when you open the latches.
Summary of Contents for 3200
Page 1: ... ...
Page 309: ...309 ...
