English
- 14 -
Digital Manual Tuning
The feature is available for service engineers or
can be used for direct channel entry if the multiplex
channel is known.
Select
•
Channel Search
from the
Installation menu
and press
OK.
Enter the multiplex number using the numeric
•
buttons. The television will automatically search
for that multiplex. When the multiplex is found any
channels not currently on the programme list will be
added and the programme information at the top of
the screen will be updated.
Repeat as necessary.
•
Note: Press
SOURC
E
button to switch between TV/
DTV.
Analogue Manual Tuning
The television can be tuned-in manually. For example:
if the television cannot be connected to a media
recorder/decoder with a SCART lead or to tune-in a
station on another System.
To allocate a programme position on the television
for a decoder and media recorder: turn the decoder
on, insert a pre-recorded
fi
lm into the media recorder
and press PLAY, then manually tune.
Press
•
MENU
and using the Left or Right button
select
Install
menu.
Using the
•
Down
button select
Program
and key
in the programme position to be tuned with the
number buttons, we suggest
Programme 0
for a
media recorder.
Use the Down button
•
to select
Search
then press
the Left or Right button to search. The television will
begin searching for channels.
Each signal will show on the television, if it is not
•
your media recorder press the
Left
or
Right
button
to restart the search.
When your media recorder signal is found, save
•
the selection by pressing the
Down
button until
Store
is highlighted, then press the
Left/Right
or
OK
button to save.
Repeat for each
•
programme position
to be tuned
then press
BACK
to
fi
nish.
Note: Press
SOURCE
button to select between TV
or DTV.
Manual Tuning
The television can be tuned-in manually using Manual Tuning feature.
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 14
00_MB35_[GB]_3910UK_IDTV_NICKEL1_37847W_(IB_INTERNET)_10071349.indd 14
02.12.2010 11:03:08
02.12.2010 11:03:08
