Chapter 7: Using the TV’s advanced features
51
Selecting the cinema mode
When you view a DVD (3:2 pulldown processed) from
a DVD player connected to the
VIDEO
,
ColorStream
HD
(component video), or
HDMI
inputs on the TV,
smoother motion can be obtained by setting the
Cinema Mode
to
Film
.
To set the Cinema Mode to Film:
(available for 480i and 1080i signals)
1無
Press
and open the
Picture
menu
2無
Highlight
Picture Settings
and press
.
3無
Highlight
Advance Picture Settings
and press
.
4無
In the
Cinema Mode
field, select
Film
.
5無
To save the new settings, highlight
Done
and
press
.
To revert to the factory defaults, highlight
Reset
and press
.
To set the Cinema Mode to Video:
Select
Video
in step 3 above.
Using the ClearFrame™ feature
(only for G310U)
The new ClearFrame 120 Hz anti-blur technology
doubles the frame rate from 60 frames per second
to 120 frames per second, virtually eliminating
motion blur without adding flicker or reducing image
brightness.
To turn on the ClearFrame:
1無
Press
and open the
Picture
menu, highlight
Picture Settings
and press
.
2無
Highlight
Advanced Picture Settings
and press
.
3無
In the
ClearFrame
field, select
On
.
4無
To save the new settings, highlight
Done
and
press
.
To revert to the factory defaults, highlight
Reset
and press
.
Note:
•
If you select one of the factory-set picture
modes (
Sports
,
Standard
,
Movie or PC
)
and then change the ClearFrame setting,
the picture mode automatically changes to
Preference.
•
When
ClearFrame
is set to
Off
, the Film
Stabilization feature will not be available
(grayed out and set to Off).
Using the Film Stabilization feature
(only for G310U)
This feature helps to eliminate video shaking.
To turn on Film Stabilization:
1無
Press
and open the
Picture
menu, highlight
Picture Settings
and press
.
2無
Highlight
Advanced Picture Settings
and press
.
3無
In the
Film Stabilization
field, select
Smooth
,
Standard
or
Off
.
4無
To save the new settings, highlight
Done
and press
.
To revert to the factory defaults, highlight
Reset
and press
.
Note:
•
If you select one of the factory-set picture
modes (
Sports
,
Standard
,
Movie
or
PC
) and
then change the Film Stabilization setting,
the picture mode automatically changes to
Preference.
•
When
ClearFrame
is set to
Off
,
Film
Stabilization
will be grayed out and set to Off
automatically.
•
When slow motion video is present the units will
treat any scrolling text as Film and may cause
a slight jitter of the scrolling text. Tuning Off the
Film Stabilization feature will correct this issue.
Using CableClear
®
digital noise
reduction
The CableClear
®
digital noise reduction feature
allows you to reduce visible interference in your
TV picture. This may be useful when receiving a
broadcast with a weak signal (especially a Cable
channel) or playing a noisy video cassette or disc.
To change the CableClear settings:
1無
Press
and open the
Picture
menu, highlight
Noise Reduction
and press
.
2無
In the
CableClear
field, select your desired setting.
Note
:
•
If the current input is
ANT/CABLE
,
VIDEO
,
the menu will display the text “CableClear.”
The available selections are
Off
,
Low
,
Middle
, and
High
.
•
If the current input is
ColorStream
HD
,
HDMI 1
,
HDMI 2
or
HDMI 3
(only
for G310U)
, the menu will display the
text “DNR.” The available selections
are
Off
,
Low
,
Middle
, and
High
.
Low
,
Middle
, and
High
will reduce the noise in
varying degrees, from lowest to highest,
respectively.
(continued)
Summary of Contents for 32C110U
Page 61: ...Note ...
