16
Sorting positions
TV channels may be moved and stored to the
position of your choice.
1
From the
SETUP
menu, press
or
to select
ATV Manual Tuning
.
2
With the list of channels now showing, press
or
to select the channel you want to move
and press
.
Manual Tuning
Pos.
0
1
ABCD
2
EFGH
3
IJKL
MNOP
4
5
6
7
Label
3
Use
or
to move through the list to your
preferred position. As you do so, the other
channels will move to make room.
4
Press
to store your move.
•
Repeat as necessary, and then press
EXIT
.
DTV Manual Tuning
Note:
The content of this menu varies depending on the DTV
input that is currently selected.
This feature is available for service engineers or can
be used for direct channel entry if the multiplex
channel is known.
1
From the
SETUP
menu, press
or
to select
DTV Manual Tuning
and press
OK
.
DTV Manual Tuning
Channel
Start Scan
25
Frequency
Bandwidth
506.0 MHz
8 MHz
Signal Booster
On
WEAK
Signal Strength
Quality
GOOD
STRONG
AVERAGE
100%
2
Use
or
to change the settings.
•
The
Number
buttons can be used to enter the
Frequency
.
3
Select
Start Scan
and press
OK
.
The television will automatically search for that
multiplex.
DTV Manual Tuning
1
2
7
40
51
ABC ONE
ABC TWO
ABC THREE
ABC 24
ABCi
1 New Channels – Total 6
New
Pos.
Type
Name
When the multiplex is found, any channels
that are not currently in the channel list will be
added and the channel information at the top
of the screen will be updated. ("
♦
" icon appears
on the
New
column of the newly added
channels.)
4
Repeat as necessary. Press
EXIT
to fi nish.
Introduction / Getting started
32404755L2450̲EN.indd 16
32404755L2450̲EN.indd 16
2014/03/05 10:24:34
2014/03/05 10:24:34
