English
- 18 -
English
• After selecting search type as
Satellite
, you can set
the desired options and press
OK
button to search.
In satellite manual scan, you can enter frequency,
polarisation, symbol rate values and change network
channel scan and satellite options by using left/right
buttons or numeric buttons on the remote. You can
then press
OK
button to search. If you enter invalid
manual tune settings a warning massage is displayed
on the screen.
Note: Frequency, polarization and symbol rate may
change in accordance with the selected channels.
Analogue Fine Tune
Only if an analogue signal or Service is available.
•
Select
Analogue Fine Tune
from the
Install and
Retune
menu by using
Up
or
Down
and
OK
buttons. Analogue fine tune screen will be displayed.
Analogue Fine Tune feature will not be available if
there are no analogue channels stored.
• Use
Left
or
Right
button to set Fine Tune. When
finished, press
OK
button.
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
•
Select
Clear Service List
from the
Install and
Retune
menu by using
Up
or
Down
and
OK
buttons.
A confirmation message will be displayed. If you
want to delete all channels, select
Yes
and press
OK.
Use this setting to clear channels stored.
Manual Tuning, Analogue Fine Tuning -
continued
The television can be tuned-in manually using Manual Search feature.
