background image

English

   - 12 -

English

Initial Installation 

Before switching on the TV, put your decoder and media recorder to 

Standby 

if they are connected and 

ensure the aerial 

and/or Satellite dish 

is connected to your TV. To set up the TV, use the buttons on the 

remote control as detailed on 

page 6

.

IMPORTANT: Ensure that the aerial 

and/or Satellite 

dish 

is connected and a Common Interface module 

is not inserted before switching on the TV for the first 

time installation.

1. 

Connect the mains plug and switch the TV to 

on 

using

 the 

/ I

 button. If the TV does not switch on, 

press any numbered or   button on the remote 

control, then the language selection menu will 

be  displayed. This  screen  will  appear  the  first 

time that the TV is switched on and each time 

the TV is reset.

2. 

By pressing 

Up

 or 

Down

 button, highlight the 

language you want to set and press 

OK

 button. 

The following message will be displayed next:

3. 

By pressing 

Left

 or 

Right

 button, select the 

country

 you want to set and press 

Down

 button 

to highlight the 

Search Type

 option. Use 

Left

 or 

Right

 to set the desired search type. Available 

search types are digital only, analog TV only 

and full. 

4. 

When set, 

Down

 button to select Teletext 

Language. Use 

Left

 or 

Right

 button to select 

desired Teletext Language.

5. 

Press 

OK

 button on the remote control to continue 

and the following message will be displayed on 

the screen:

6. 

Select 

Yes

 button by using 

Left

 or 

Right

 button 

and press 

OK 

button to continue. Afterwards, the 

following OSD will be displayed on the screen:

7. 

If you select 

Cable

 option, the following screen 

will be displayed:

 

Note:

 Although this cable feature can be selected, 

it is not fully supported in the UK. If cable signals 

are input to this TV from a Cable Network Provider 

some may be displayed.

8. 

You can select frequency ranges from this 

screen. For highlighting lines you see, use 

Up

 or 

Down

 button. You can enter the frequency range 

manually by using the numeric buttons on the 

remote control. Set Start and Stop Frequency as 

desired by using numeric buttons on the remote 

control. After this operation, you can set Search 

Step as 8000 kHz or 1000 kHz. If you select 

1000 kHz, the TV will perform search process 

in a detailed way. Searching duration will thus 

increase accordingly. When finished, press 

OK 

button to start automatic search.

9. 

If you select 

Aerial

 option from the Search Type 

screen, the television will search for broadcasts. 

Summary of Contents for 32L344 DG



























Reviews: