English
- 13 -
English
10.
The Auto tuning screen will appear and the
television will start to search for available stations.
The progress bar will move along the line. You
must allow the television to complete the search.
The following OSD will be displayed on the screen
and the television will search for the selected
broadcasts:
Note
:
You can press
MENU
button to cancel.
11.
If you select
Satellite
option from the Search Type
screen,
Antenna Type
menu will be displayed.
There are three types of antenna selection. You
can select
Antenna type
as
Direct
,
Unicable
or
DiSEqC.
Direct:
If you have a single receiver and a direct
satellite dish, select this antenna type. After selecting
Direct
, another menu screen will be displayed.
Select an available satellite and press
OK
to scan
for services.
Unicable:
If you have multiple receivers and a
unicable system, select this antenna type. Press
OK
to continue. Configure settings by following
instructions on the screen. Press
OK
to scan for
services.
DiSEqC switch
: If you have multiple satellite
dishes and a
DiSEqC switch
, select this antenna
type. After selecting DiSEqC switch, another
menu screen will be displayed. You can set four
DiSEqC
options (if available). Press
GREEN
button to scan all satellites or press
YELLOW
button to scan only the highlighted satellite. To
save and exit press
OK
button.
Initial Installation -
continued
After the available stations are stored, Channel List
will be displaye
d on the screen.
• Press
OK
button to quit channel list and watch TV.
Note
:
Do not turn off the TV while initializing first time
installation.
If using the TV at home do not set “Store Mode” keep
to “Home Mode”.
• Press the
Left
or
Right
button to choose the required
language region.
• After the Teletext language is selected, press
MENU
but
ton to exit.