13
Remote Control
Installing Batteries in the Remote Control
For CT-95007 Remote Control:
1. Press the release button on the back of the remote control to
remove the battery compartment cover.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - )
ends of the batteries with the (+) and ( - ) ends indicated in the battery
compartment.
3. Replace the battery compartment cover.
For CT-95010 Remote Control:
1. Slide the back cover to open the battery compartment of the remote
control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - )
ends of the batteries with the (+) and ( - ) ends indicated in the battery
compartment.
3. Close the battery compartment with the cover.
1
2
3
NOTES
• Product image is only for reference, actual product may vary in
appearance.
Handling the Batteries
• Incorrect use of batteries may cause corrosion or battery leakage,
which could cause fire, personal injury or damage to property.
• Only use the battery type indicated in this manual.
• Do not mix old and new batteries or different types of batteries.
• Do not dispose of used batteries as domestic waste. Dispose of
them in accordance with local regulations.
• Battery chemicals can cause a rash. If the batteries leak, clean
the battery compartment with a cloth. If chemicals touch your skin,
wash immediately.
• If you do not intend to use the remote control for a long time,
remove the batteries.
• Remove depleted batteries immediately to prevent battery acid
from leaking into the battery compartment.
Remote Control Operation Range
The remote control can work at a distance of up to 8 meters in front
of the TV set.
1. The remote control angle: taking the remote sensor as an apex, 6
meters away, its controlled horizontal angle is within ±30°, while the
vertical angle is within ±15°.
2. The operating distance may vary depending on the brightness of the
room.
Pairing the Remote Control
Only available on certain models and bluetooth remote control.
1. Pair the remote to the TV after you power it on. Keep the remote
control within 10 feet from the TV. Press and hold the menu button at
least 3 seconds to start pairing.
2. If the remote paired successfully then a confirmation will display
on the screen. If it did not pair successfully then an ‘unsuccessful’
message will display. Repeat the previous steps.
NOTES
• If an unknown error occurred with the remote then it could have
been caused by interference. Try to remove what’s causing the
interference and pair it again.
• If an unknown error occurred in the remote control while the
battery power is normal, you can take out the batteries, press
any key for 1~2 seconds, and insert them back. Then the remote
control will work normally.
• The remote cannot be paired to the TV while the TV is in standby
mode.
Voice search function
• There is a voice search function in the upper left corner of the
homepage.
• This function will be used by the apk of "Android TV" in your
phone and the apk can be downloaded from Google play store.
1
2
3
