English
- 2 -
3
Connections
Antenna
Connect the antenna cable/s to your TV.
satellite
dish
aerial /
cable TV
rear side of the TV
External Devices
PLEASE ENSURE BOTH UNITS ARE
SWITCHED OFF BEFORE CONNECTING
Use the proper cable to connect two units together.
To select the desired input source, press the
Source
button on the remote control. Or press the centre of the
control switch inwards consecutively until the
Sources
list
is displayed.
HDMI connection
rear of TV
Power
After unpacking, allow the TV set to reach the ambient room temperature before you
connect the set to the mains. Plug the power cable to the mains socket outlet.
Plug the power cable to the mains socket whilst in ‘off’ position, and then turn the mains
socket on.
IMPORTANT
: The TV set is designed to operate on a
220-240V AC, 50 Hz
supply.
Switching on the TV
4
In order to turn the TV on from standby mode:
•
Press the
Standby
button, a numeric button or
Pro/-
button on the remote control
• Press the centre of the control switch inwards,
located at the rear left hand side of the TV
Internet connection
5
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired
or wireless connection.
Wired
Wireless
wireless
modem/router
No
te:
The figures are for representation only
