background image

– 17 –

Note:

It will not be possible to change programme position 
while in Teletext mode, you will have to cancel the 
teletext fi rst by pressing 

TEXT

 to return to a normal TV 

picture.

To select the time display:

If you press 

 

while watching a normal TV 

broadcast, you will see a time display from the 
broadcaster. It will remain on the screen for about 5 
seconds.

21:56:25

9:56 and 25 seconds p.m.

 Troubleshooting

Before calling a service technician, please check the 
following table for a possible cause of the symptom 
and some solutions.

Symptom and solution

TV will not turn on

• 

 Make sure the power cord is plugged in, and 
then press 

1

.

• 

 The remote control batteries may be dead. 
Replace the batteries.

No picture, no sound

• 

 Check the aerial connections.

No sound, picture OK

• 

 The sound may be muted. Press 

2

 +, − or 

u

.

• 

 The station may have broadcast diffi

  culties. 

Try another channel.

Poor sound, picture OK

• 

 The station may have broadcast diffi

  culties. 

Try another channel.

Poor picture, sound OK

• 

 Check the aerial connections.

• 

 The station may have broadcast diffi

  culties. 

Try another channel.

• 

 Adjust  the 

PICTURE

 menu.

Poor reception of broadcast channels

• 

 Check the aerial connections.

• 

 The station may have broadcast diffi

  culties. 

Try another channel.

• 

 Make sure the 

Colour System

 is properly set.

Teletext problems

• 

 Check the aerial connections.
Good performance of text depends on a good 
strong broadcast signal.

The brightness of the screen comes down, or fl ickers of 
the screen are caused, or some parts of the screen do 
not light up.

• 

 When you just buy and start to use this TV, a 
fl ickering may be caused in the screen. In this 
case, switch off  the TV, then switch on it again 
to cure the condition.

Some pixels of the screen do not light up

• 

 The LCD display panel is manufactured 
using an extremely high level of precision 
technology, however, sometimes some pixels 
of the screen may be missing picture elements 
or have luminous spots. This is not a sign of a 
malfunction.

The picture brightness varies when you display switch 
the TV on.

• 

 If you switch the TV on at 0°C and under, wait 
until the warms up.

Multiple images

• 

 The station may have broadcast diffi

  culties. 

Try another channel.

• 

 Aerial reception may be poor. Use a high 
directional outdoor aerial.

• 

 Check if the direction of the aerial has 
changed.

Poor colour or no colour

• 

 The station may have broadcast diffi

  culties. 

Try another channel.

• 

 Adjust  the 

Tint

 and/or 

Colour

 in the 

PICTURE

 

menu.

The remote control does not operate

• 

 Remove all obstructions between the remote 
control and the remote control sensor on the 
TV.

• 

 The remote control batteries may be dead. 
Replace the batteries.

Summary of Contents for 32P1400 Series

























Reviews: