Print this page
Service Mode
Status Check Mode
1. Press "9" button thrice on Remote Control during display of adjustment menu in the service
mode. The status of this model will begin to check.
2. During Status Check, the following displays are shown.
ADJUSTMENT
(1) MAIN :
Main source information.
Display RF position number (00 - 99) on the main screen, or Input Source (EXIT 1, HDMI 1,
PC)
(2) MAIN FORMAT :
Display Video format information.
(3) MAIN PLL :
Main PLL information.
(4) SCREEN SIZE :
Display the screen size as follows.
Native
Subtitle
14:9
Wide
4:3
SuperLive
Cinema
PC Normal
