Print this page
Service Mode
Setting Hotel Mode
Enter Service Mode and select Hotel Mode menu by pressing P
or P
.
After selecting Hotel Mode, press
+ to enter details setting in Hotel Mode.
To select menu, press P
or P
and press OK to enter the adjustment menu of following table
data.
To move the cursor in the adjustment, press
+ or
−.
1. By pressing P
or P
, following table data setting will change the value either 1 or 0 on
selected items as follows;
OPT2
ADJUSTMENT
OPT2
FUNCTION DESCRIPTION
1
0
(Normal)
D7 (bit7)
Enable mode that TV standby will be set
in forced when turning the main power
ON
Enable
(This function is ignored
when D6 is set to 1.)
Disable
D6 (bit6)
Enable mode that TV On will be set in
forced when turning the main power ON
Enable
Disable
D5 (bit5)
Disable all buttons at side panel.
Disable
Enable
D4 (bit4)
Disable all buttons at side panel except
input key (Video/TV).
Disable
(This function is ignored
when D5 is set to 1.)
Enable
D3 (bit3)
User remote control operation
Disable
(Only setting of Service
mode and Super User mode
are possible.)
Enable
D2 (bit2)
Disable SET UP MENU except
language.
(Tuning/Convertor adjustment etc.)
Disable
(Display language setting
only)
(This function is ignored
when D1 is set to 1.)
Enable
D1 (bit1)
Disable SETUP MENU
Disable
Enable
D0 (bit0)
HOTEL Mode
On (Enable the setting of D1
to D7)
Off
(Normal)
