Toshiba 32W3663, Operating Instructions Manual

English

   - 10 -

Connections

Connector

Type

Cables

Device

Scart 

Connection 

(back)

VGA 

Connection 

(back)

SIDE AV

(**)

PC/YPbPr 

Audio 

Connection 

(side)

YPbPr/PC Audio 

Cable

Side Audio/Video 

Connection Cable

SIDE AV

(**)

PC/YPbPr 

Audio 

Connection 

(side)

YPbPr/PC Audio Cable

HDMI 

Connection 

(back)

SPDIF

(**)

SPDIF 

(Optical Out) 

Connection 

(back)

SPDIF

(**)

SPDIF 

(Coaxial Out) 

Connection 

(back)

SIDE AV

(**)

Side AV 

(Audio/Video) 

Connection 

(side)

Audio/Video 

Cable

Side Audio/Video 

Connection Cable

SIDE AV

(**)

Side AV 

(Audio/Video) 

Connection 

(side)

AV Cable

HEADPHONE

Headphone 

Connection 

(side)

YPBPR 

YPbPr Video 

Connection 

(back)

PC to YPbPr Connection Cable

USB 

Connection 

(side)

CI 

Connection 

(side)

CAM 

module

NOTE: When connecting a device 

via the YPbPr or the Side AV input, 

you must use a connection adapter 

cable.

 See the illustrations on the left 

si

de. Yo

u can use YPbPr to VGA cable 

to enable YPbPr signal via VGA input. 

You cannot use VGA and YPbPr at the 

same time. To enable PC/YPbPr audio, 

you will need to use the Side AV input 

with a YPbPr/PC audio cable for 

audio connection, using the Side AV 

connection cable’s RED and WHITE 

inputs (To enable PC/YPbPr audio, you 

will need to use the side audio inputs 

with a YPbPr/PC audio cable for audio 

connection [Depending on the model]). 

If an external device is connected via the 

SCART socket, the TV may automatically 

switch to AV mode. When receiving 

DTV channels (Mpeg4 H.264) or while 

in Media Browser mode, output will not 

be available via the scart socket. When 

using the wall mounting kit (available 

from third party in the market, if not 

supplied), we recommend that you plug 

all your cables into the back of the TV 

before mounting on the wall.  Insert or 

remove the CI module only when the TV 

is SWITCHED OFF. You should refer to 

the module instruction manual for details 

of the settings. The/Each USB input of 

your TV supports devices up to 500mA. 

Connecting devices that have current 

value above 500mA may damage your 

TV. By connecting an HDMI cable to your 

TV, you have to use only a shielded HDMI 

cable to guarantee a sufficient immunity 

against parasitic frequency radiation.

 If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making 

any connection. After the connection is done, you can turn on the units and use them.

(**) Depending on the model