94
Mobile Computing
Using the optional high-capacity battery
Installing the optional high-capacity battery in the base
1
Hold the battery at an angle with the label facing down and fit
the connector side into the base.
CAUTION: The optional high-capacity battery is designed so
that it cannot be installed in reverse polarity. Make sure the
battery label is facing down. Trying to install the battery
incorrectly (with reverse polarity) could damage the battery.
2
Press down carefully until the battery pack is fully seated.
NOTE: You may feel some resistance. Press firmly, but do
not sharply force the battery into place.
CAUTIONS: Be careful not to pinch your fingers.
Never try to install anything other than the optional high-
capacity battery in the base.
3
Slide the battery lock on the right side of the optional high-
capacity battery base to the locked position.
NOTE: The battery release lever on the left side of the base
should also slide to the locked position automatically. If it
does not, set it to the locked position manually.
Summary of Contents for 3490CT - Portege - PIII 700 MHz
