Intr
oduction
Connecting
y
our T
V
Using the
Remote Contr
ol
Setting up
y
our T
V
Using the T
V’s
F
eatur
es
Appendix
Index
7
ANT( 75 )
ANT-1
OUT
ANT- 2
OUT
IN
S-VIDEO
VIDEO
VIDEO 1
VIDEO 2
L /
MONO
AUDIO
R
DVD IN
P
R
P
B
Y
COLOR
STREAM
INPUT
L
AUDIO
R
OUT
ON
OFF
AUDIO CENTER
CHANNEL IN
IN from ANT
VIDEO AUDIO
OUT to TV
CH 3
L
R
CH 4
IN
OUT
L /
MONO
AUDIO
R
VIDEO
VAR/FIX
L
PIP AUDIO
R
Connecting your TV
Note:
•
If you have a mono VCR, connect L/Mono
to the VCR’s AUDIO OUT terminal using
only one audio cable.
•
If you have a VCR with S-video, use an
S-video cable (plus the standard audio
cables) instead of a standard video cable
for better picture quality. Do not connect a
standard video cable and an S-video cable
to VIDEO-1 on the TV back (or VIDEO-3
on the TV front) at the same time, or the
picture performance will be unacceptable.
Connecting a VCR
This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
one channel while watching another channel.
You will need:
• two coaxial cables
• one set of standard A/V cables
Note:
Cables are not supplied with your TV.
Coaxial cable
is the cable that comes in from your antenna, cable TV service,
or cable converter box. Coaxial cable uses “F” connectors.
Standard stereo A/V cables
usually come in sets of three, and are typically
color-coded according to use: yellow for video, red for stereo right audio, and
white for stereo left (or mono) audio. Your TV’s standard A/V inputs are
color-coded in the same manner as the cables.
S-Video cable
is for use with video equipment that has S-Video connectors.
Component video cables
come in sets of three (typically color-coded red,
green, and blue), and are for use with video equipment that has component video
connectors. Your TV’s ColorStream
®
(component video) inputs are color-coded in
the same manner as the cables.
NOTE REGARDING PICTURE QUALITY
When connecting video equipment to your Toshiba TV:
For GOOD picture quality:
Use a standard yellow video cable.
For BETTER picture quality:
If your equipment has S-video connectors, use
an S-video cable
instead of
a standard yellow video cable. (You still must
connect the standard red and white audio cables for full system connection,
but
do not connect a standard yellow video cable at the same time
or the
picture performance will be unacceptable.)
For BEST picture quality:
If your equipment has component video
connectors, use component video cables
instead of
a standard yellow video
cable or S-video cable. (You still must connect the standard red and white
audio cables for full system connection.)
CAUTION:
Do not plug in any power cords
until you have finished connecting all equipment.
Coaxial (antenna) cable
Standard stereo A/V cables
(typically color-coded yellow for video,
red and white for audio)
S-video cable
Component video cables
(typically color-coded red, green, blue)
TV
Stereo VCR
From Cable or Antenna
The unauthorized recording, use, distribution,
or revision of television programs, videotapes,
DVDs, and other materials is prohibited under
the Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
