English
- 17 -
Film Mode
Films are recorded at a different number of frames per second to normal television
programmes. Turn this feature on when you are watching films to see the fast motion
scenes clearly.
Skin Tone
Skin tone can be changed between -5 and 5.
Colour Shift
Adjust the desired colour tone.
Gamut Mapping
You can use this option to set the range of colours displayed on your TV screen. When
set as
On
, colours are set according to the source signal. When set as
Off
, the TV’s
maximum colour capacity is used by default (recommended option).
Note: This option may not be available depending on the TV model and its features.
HDMI Full Range
While watching from a HDMI source, this feature will be visible. You can use this feature
to enhance blackness in the picture.
Reset
Resets the picture settings to factory default settings (except
Game
mode).
PC Position
Appears only when the input source is set to VGA/PC.
Autoposition
If the image is not centered in VGA mode use this option to automatically adjust the
position of the image. Press
OK
to start the auto adjustment.
H Position
This item shifts the image horizontally to the right hand side or left hand side of the screen.
V Position
This item shifts the image vertically towards the top or bottom of the screen.
Dot Clock
Dot Clock adjustments correct the interference that appear as vertical banding in dot
intensive presentations like spreadsheets or paragraphs or text in smaller fonts.
Phase
Depending on the input source(computer etc.) you may see a hazy or noisy picture on
the screen. You can use phase to get a clearer picture by trial and error.
While in VGA (PC) mode, some items in
Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture
menu
while in PC mode.
Sound Menu Content (Optional)
Dolby Audio
Smart
,
Movie
,
Music
,
News
and
Off
options will be available. Set as
Off
to disable.
Note:
Some items in
Sound menu will be grayed out and unavailable if set to an option other than Off
.
DTS TruSurround
Enables or disables the
DTS TruSurrou
nd
.
Sound Output
Sets the sound output preference.
TV
,
S/PDIF
and
HDMI ARC
options will be available.
There will be no sound output except through the selected option. If
HDMI ARC
option
is selected,
CEC
feature will be enabled.
Note: Depending on the selected option some items in Sound menu will appear as grayed out and will be
unavailable.
AVL (Automatic
Volume Limiting)
Sets the sound to obtain fixed output level between programmes.
If the
Dolby Audio
menu item is set to an option other than
Off
the
AVL
setting options
will change.
Auto
,
Night
,
Normal
and
Off
options will be available. In
Auto
mode the
TV will switch to
Normal
or
Night
mode automatically according to the current time
information. If no time information is available this option will always function as
Normal
.
When the TV switches to
Night
mode for the first time after setting this option as
Auto
,
an information bar will pop up on the screen.
Please note that compared to
Normal
mode
Night
mode provides more aggressive
dynamic compression control which is suitable for silent environments.
Advanced Settings
Equalizer
Selects the equalizer mode. Custom settings can be made only when in
User
mode.
Dynamic Bass
Enables or disables the Dynamic Bass.
DTS DRC
Dynamic Range Control provides gain adjustment of the source to maintain suitable
audible range at both low and high playback levels. It will function only if the source
audio format is DTS. Enable or disable the
DTS DRC
by setting as
On
or
Off
.
Sound Mode
You can select a sound mode (If the viewed channel supports).
