background image

English

   - 5 -

Digital Switchover

8IFOEPFTTXJUDIPWFSIBQQFO 

5IFFYBDUEBUFZPV
TXJUDIEFQFOETPOUIF
USBOTNJUUFSZPVBSF
TFSWFECZ5PDIFDL
XIFOZPVTXJUDI
HPUP%JHJUBM6,µT
QPTUDPEFDIFDLFSPO
XXXEJHJUBMVLDPVL

$IFDLZPVS*57OFXT
TFSWJDFPSMPPLBU5FMFUFYU
QBHFUPTFFXIBU57
SFHJPOZPVµSFJO

$PQFMBOETXJUDIFTPO0DUPCFS

,FFQUIJTJNQPSUBOU
JOGPSNBUJPOBCPVU
IPXUPSFUVOF
ZPVS57EVSJOHUIF

EJHJUBM

57

TXJUDIPWFS

Television in the UK is going digital, bringing us all 
more choice and new services. Starting in late 2007 
and ending in 2012, television services in the UK will 
go completely digital, TV region by TV region.
Please see above to 

fi

 nd out when your area switches 

to digital. Digital UK is the independent, non-pro

fi

 t 

organisation leading the process of digital TV 
switchover in the UK. 
Digital UK provides impartial information on what 
people need to do to prepare for the move to digital, 
and when they need to do it.

How the switchover affects your TV equipment:

Your new TV has a digital tuner built in, which means 
it is ready to receive the Freeview signal by simply 
plugging it into your aerial socket (check if you can 
get digital TV through your aerial now, or whether 
you’ll have to wait until switchover, at www.digitaluk.
co.uk).
When the TV switchover happens in your area, there 
are at least two occasions when you will need to 
re-tune your TV in order to continue receiving your 
existing TV channels, and also to pick up new ones, 
Digital UK, the body leading the digital TV switchover, 
will advise you when you need to re-tune during the 
switchover.
If you choose to connect your TV to satellite or 
cable with a digital box then it will not be affected by 

switchover, and you won’t need to re-tune. Keep this 
important information about how to re-tune your TV 
during the digitalTV switchover

How to re-tune:

As new services are broadcast it will be necessary to 
re-tune the television in order to view them. Auto tuning 
will completely retune the television and can be used 
to update the channel list.

Press 

• 

MENU

 button on the remote control unit.

Select 

• 

SETUP

 and then 

INSTALLATION

 option. 

Select Automatic Search.
A screen will appear warning that previous digital 

• 

programmes and settings will be deleted.
You must allow the television to complete the 

• 

search...
When the search is complete the Auto tuning screen 

• 

will display the total number of service found.

NOTE: Further detailed instructions on Auto tuning 
can be found in the TV owners manual.

If you are missing channels, it may be that they are 
not available in your area, or that your aerial needs 
upgrading.
If you have any further questions, please contact your 
equipment supplier or call Digital UK on 08456 50 50 
50 or visit www.digitaluk.co.uk 

00_MB35_[GB]_3910UK_IDTV_NICKEL1_40740W_(IB_INTERNET)_10069649.indd   5

00_MB35_[GB]_3910UK_IDTV_NICKEL1_40740W_(IB_INTERNET)_10069649.indd   5

19.10.2010   08:33:59

19.10.2010   08:33:59

Summary of Contents for 40KV700B










































Reviews: