Toshiba 42 UL21 Series, Operating Instructions Manual

English

   - 16 -

(**)

 Limited Models Only

list according to your preferences using the 

Edit

 tab 

options or press the 

Home

 button to quit and watch TV.

While the search continues a dialogue may appear, 

asking whether you want to sort channels according 

to the LCN

(*)

. Select 

Yes

 and press 

OK 

to confirm.

(*) 

LCN is the Logical Channel Number system that organises 

available broadcasts in accordance with a recognisable 

channel number sequence (if available).

Notes:

To search for M7 channels after the 

First Time Installation

,

you should perform the first time installation again. Or press the 

Home

 button and enter the 

Settings>Installation>Automatic 

channel scan>Satellite

 menu. Then follow the same steps 

mentioned abow in the satellite section.
Do not turn off the TV while initialising first time installation. 

Note that, some options may not be available depending on 

the country selection.

Using Satellite Channel Table Feature

You can perform these operations using the 

Set-

tings>Installation>Satellite Settings>Satellite 

Channel Table

 menu. There are two options regarding 

to this feature.
You can download or upload satellite channel table 

data. In order to perform these functions a USB device 

must be connected to the TV.
You can upload current services and related satellites 

& transponders in the TV, to a USB device.
Additionally you can download one of the satellite 

channel table files stored in a USB device, to the TV. 
When you select one of these files, all services and 

related satellites and transponders in the selected 

file will be stored in the TV. If there are any installed 

terrestrial, cable and/or analogue services, they will 

be kept and only satellite services will be removed. 
Afterwards, check your antenna settings and make 

changes if necessary. An error message stating “

No 

Signal

” may be displayed if the antenna settings are 

not configured properly.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (HDD with external power 

supply) external hard disk drives or USB memory stick to your 

TV by using the USB input(s) of the TV.

IMPORTANT!

 Back up the files on your storage devices 

before connecting them to the TV. Manufacturer will 

not be responsible for any file damage or data loss. 

Certain types of USB devices (e.g. MP3 Players) 

or USB hard disk drives/memory sticks may not be 

compatible with this TV. The TV supports FAT32 and 

NTFS disk formatting but

recording will not be available 

with NTFS formatted disks.
While formatting USB hard drives which have 

more than 1TB (Tera Byte) storage space you may 

experience some problems in the formatting process.  
Wait a little while before each plugging and unplugging 

as the player may still be reading files. Failure to do 

so may cause physical damage to the USB player 

and the USB device itself. Do not pull out your drive 

while playing a file.
You can use USB hubs with your TV’s USB input(s). 

External power supplied USB hubs are recommended 

in such a case. 
It is recommended to use the TV’s USB input(s) 

directly, if you are going to connect a USB hard disk.

Note:

 When viewing media files the 

Media Browser

 menu 

can only display a maximum of 1000 media files per folder.

USB Recording (**)

Recording a Programme

IMPORTANT: 

When using a new USB hard disk 

drive, it is recommended that you first format the 

disk using your TV’s 

Format Disk

 option in the 

TV>Recordings>Settings

 menu.

To record a programme, you should first connect a USB 

disk to your TV while the TV is switched off. You should 

then switch on the TV to enable the recording feature.

To use recording your USB drive should have 2 GB free 

space and be USB 2.0 compatible. If the USB drive 

is not compatible an error message will be displayed.

To record long duration programmes such as movies, it 

is recommended to use USB Hard disk drives (HDD’s).

Recorded programmes are saved onto the connected 

USB disk. If desired, you can store/copy recordings 

onto a computer; however, these files will not be 

available to be played on a computer. You can play 

the recordings only via your TV.

Lip Sync delay may occur during timeshifting. Radio 

record is supported. The TV can record programmes 

up to ten hours.

Recorded programmes are split into 4GB partitions. 

If the writing speed of the connected USB disk is not 

sufficient, the recording may fail and the timeshifting 

feature may not be available.

It is recommended to use USB hard disk drives for 

recording HD programmes.

Do not pull out the USB/HDD during a recording. This 

may harm the connected USB/HDD.

Multipartition support is available. A maximum of two 

different partitions are supported. The first partition 

of the USB disk is used for USB Recording ready 

features. It also must be formatted as the primary 

partition to be used for the USB Recording ready 

features.

Some stream packets may not be recorded because 

of signal problems, as a result sometimes videos may  

freeze during playback.

While recording a programme in the background you 

can use menu options, switch to another source or use 

Media Browser

 functions, such as viewing pictures, 

playing video and music files, and even play back the 

ongoing recording.