background image

English

   - 21 -

(**)

 Limited Models Only

Colour Tuner

Opens colour tuner settings. Set the 

Colour Tuner

 as 

Enabled

 to adjust the 

Hue

Colour

 and 

Brightness 

values manually.

Gamut Mapping

You can use this option to set the range of colours displayed on your TV screen. When 

set as 

On

, colours are set according to the source signal. When set as 

Off

, the TV’s 

maximum colour capacity is used by default (recommended option).

Note:

 This option may not be available depending on the TV model and its features.

Gamma

You can use this option to set your gamma preference. Press Left/Right directional 

buttons to set to 

Normal

Bright

 or 

Dark

Note:

 This option may not be available depending on the TV model and its features and you may not be able 

to change this setting depending on the current content.

HDMI Full Range

While watching from a HDMI source, this feature will be visible. You can use this feature 

to enhance blackness in the picture.

Reset

Resets the picture settings to factory default settings (except 

Game

 mode).

Sound Menu Content (**)

Dolby Atmos

Your TV supports Dolby Atmos technology. By means of this technology the sound moves 

around you in three-dimensional space, so you feel like you're inside the action. You will 

have best experience if input audio bitstream is Atmos. 

Auto

On

 and 

Off

 options will be 

available. If set as 

Auto

, the TV will switch between 

On

 and 

Off

 modes automatically 

depending on the input audio bitstream information, if the input audio bitstream is Atmos 

this feature will work as if it is set as 

On

. Set as 

Off

 to disable.

Mode

Smart

Movie

Music

News

 and 

Off

 options will be available. Set as 

Off

 to disable. 

Note:

 Some items in 

Sound

 menu will be greyed out and unavailable if set to an option other than 

Off

.

Surround Sound

Enables or disables the surround sound mode.

Sound Output

Sets the sound output preference. 

TV

S/PDIF

HDMI ARC

Headphone Only 

and

 

Lineout

 options will be available. There will be no sound output except through the 

selected option and the headphone jack. Note that, if this option is set as 

Headphone 

Only

, TV speakers will be muted when headphone set is plugged in.

When you connect an external amplifier to your TV using the headphone jack, you can 

select this option as 

Lineout

. If you have connected headphones to the TV, set this 

option as 

Headphone Only

. Please ensure before using headphones that this menu 

item is set to 

Headphone Only

. If it is set to 

Lineout

, the output from the headphone 

socket will be set to maximum which could damage your hearing.
If 

HDMI ARC

 option is selected, 

CEC 

feature will be enabled. 

Note:

 Depending on the selected option some items in 

Sound

 menu will appear as greyed out and will be 

unavailable.

AVL (Automatic 

Volume Limiting)

Sets the sound to obtain fixed output level between programmes.
If the 

Mode

 menu item is set to an option other than 

Off

 the 

AVL

 setting options will 

change. 

Auto

Night

Normal

 and 

Off 

options will be available. In 

Auto

 mode the 

TV will switch to 

Normal

 or 

Night

 mode automatically according to the current time 

information. If no time information is available this option will always function as 

Normal

When the TV switches to 

Night

 mode for the first time after setting this option as 

Auto

an information bar will pop up on the screen.
Please note that compared to 

Normal

 mode 

Night

 mode provides more aggressive 

dynamic compression control which is suitable for silent environments.

eARC

When the 

Sound Output

 option is set to 

HDMI ARC

, the 

eARC

 menu option will be 

available. Otherwise, it will be greyed out. This option will be set to 

On

 by default. Set 

to 

Off

 to disable. Refer to 

CEC

 section for more information.

Advanced Settings

Equalizer

Selects the equalizer mode. Custom settings can be made only when in 

User

 mode.

Dynamic Bass

Enables or disables the Dynamic Bass.

Sound Mode

You can select a sound mode (if the viewed channel supports).

Summary of Contents for 42 UL21 Series















































Reviews: