fluid should contact the skin or clothing, wipe off with alcohol, etc., and rinse thoroughly with water. If the fluid should enter
the eyes, immediately rinse the eyes thoroughly with running water.
2.
When attaching the LCD module to the LCD cover, position it appropriately and fasten at the position where the display can
be viewed most conveniently.
3.
Carefully align the holes at all four corners of the LCD module with the corresponding holes in the LCD cover and fasten
with screws. Do not strongly push on the module because any impact can adversely affect the performance. Also use
caution when handling the polarized screen because it can easily be damaged.
4.
If the panel surface becomes soiled, wipe with cotton or a soft cloth. If this does not remove the soiling, breathe on the
surface and then wipe again. If the panel surface is extremely soiled, wipe the panel surface with CRT cleaner sprayed
onto the cloth. Do not spray the cleaner on the panel. Pay attention not to scratch the panel surface.
5.
Leaving water or other fluids on the panel for an extended period of time can result in discoloration or stripes. Immediately
remove any type of fluid from the screen.
6.
Glass is used in the panel construction. Damage can occur if dropped or struck with hard objects.
3
3
Summary of Contents for 42HL67 - 42" LCD TV
