A
Check that
Panel lock
is not
ON
.
A
Good performance of text depends on a good
strong broadcast signal. This normally requires a
roof or loft aerial. If the Text is unreadable or garbled,
check your aerial. Go to the
main index
page of the
teletext service and look for the
User Guide
. This will
explain the basic operation of teletext in some detail. If
you need further information on how to use text
see the
teletext
section.
A
Check that the switch on the side is in TV mode.
Check that the batteries aren’t dead and that they
are inserted correctly.
Why am I having problems with teletext?
Why doesn’t the remote control work?
I have a picture, but why have I no sound?
Q
Why don’t the controls on the front of the TV work?
Q
A
The
input
socket maybe set to
S-VIDEO
in the
AV connection
menu.
Why is the video recorder picture in black and white?
Q
A
Remove it by pressing the
CALL
button.
Why is there a message permanently on the screen?
Q
FOR YOUR GUIDANCE
27
Q
Q
A
When you connect a
Super Woofer
, make sure you
choose
Woofer
EXT
. in the
AV connection
menu.
Why doesn’t my External Super Woofer work?
Q
A
Blue screen
in the
Feature menu
is
ON
.
When no signal is being received, the TV will turn
off the sound and switch the TV screen to blue. After
20 minutes the TV will switch to Standby mode.
Why has my screen turned blue?
Q
?
For television
operation queries,
please ring the
helpline…
Remember…
Q
uestions
and
A
nswers
…
continued
Why can’t I see the video tape I am playing?
Q
A
Make sure you have connected the VCR to the TV
using a
Scart lead
and then select the correct
input using the
B
button.
A
Check Scart lead connection.
Check
Digital input
OFF
. See
AV connections
.
Why is the video picture good but there is no sound?
Q
A
Press the volume button
+
j
or the sound mute
k
button.
A
If you are unable to obtain full Dolby Digital check:
The
Rear speaker
(in
Surround set up
) says
YES
and the equipment is either connected by a phono or
optical link as well as through a Scart socket or
COMPONENT VIDEO INPUT. Also check that the correct
external source is selected
i.e.
EXT 3
or
EXT 4
(in
AV
connection
).
If you connect external front left and right speakers, you
must set the External speaker switch to
EXT
to get the full
benefit of Dolby Digital – if the switch is left on
INT
the
external speakers will not function.
Turn the television
off
before changing the position of the switch.
A
Check the speaker switch has been set to
EXT
.
Why is there no sound from the external left and
right speakers?
Q
A
If you are unable to obtain surround sound effects
from the rear speakers whilst playing a Dolby
Surround video tape, check that the video recorder is a
stereo unit and is connected by a scart lead. Then check
the
Surround set up
in the
Feature menu
.
Why is there no Dolby Surround?
Q
Why is there no Dolby Digital?
Q
