Toshiba 43V6763DB, Operating Instructions Manual

English

   - 15 -

Loop/Shuffle Mode Operation

Start playback with the 

Play 

button and activate 

All files in the list will be 

continuously played in original 

order

Start playback with the 

OK 

button and activate 

The same file will be played 

continuously (repeat)

Start playback with the 

Play

button and activate 

All files in the list will be 

played once in random order

Start playback with the 

Play

button and activate 

, 

All files in the list will be 

continuously played in the 

same random order.

Custom Boot Up Logo

You can personalize your TV and see your favorite 

image or photo on the screen each time your TV boots 

up. To do this, copy your favorite image files into a USB 

disk and open them from the 

Media Browser

 menu. 

When you have chosen the desired image, highlight it 

and press 

OK

 to view it in full screen. Press 

OK

 again 

to choose the image as custom logo. A confirmation 

message will be displayed. Select 

Yes

 and press 

OK

again. If the image is suitable

(*)

 you will see it on the 

screen during the TV’s next boot up.

Note: If you perform a First Time Installation the TV will 

return to using the default logo, if any.
(*) Images must have an aspect ratio between 4:3 to 16:9 

and they must be in .jpeg, .jpg or .jpe file formats. The image 

cannot be set as boot logo, which’s resolution doesn’t appear 

on the info banner.

FollowMe TV (if available)

With your mobile device you can stream the current 

broadcast from your smart TV using the 

FollowMe 

TV

 feature. Install the appropriate Smart Center 

application to your mobile device. Start the application. 

For further information on using this feature refer to 

the instructions of the application you use.

Note: This application may not be compatible with all mobile 

devices. Both of the devices must be connected to the same 

network.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled 

devices, that are connected through HDMI ports by 

using the remote control of the TV.
The 

CEC

 option in the 

System>Settings>More

 menu 

should be set as 

Enabled

 at first. Press the 

Source

button and select the HDMI input of the connected 

CEC device from the 

Sources List

 menu. When 

new CEC source device is connected, it will be listed 

in source menu with its own name instead of the 

connected HDMI ports name(such as DVD Player, 

Recorder 1 etc.).
The TV remote is automatically able to perform the 

main functions after the connected HDMI source has 

been selected.

To terminate this operation and control the TV via 

the remote again, press 

Quick Menu

 button on the 

remote, highlight the 

CEC RC Passthrough

 and 

set as 

Off

 by pressing Left or Right button. This 

feature can also be enabled or disabled under the 

System>Settings>More

 menu.

The TV supports ARC (Audio Return Channel). This 

feature is an audio link meant to replace other cables 

between the TV and an audio system (A/V receiver 

or speaker system).
When ARC is active, the TV does not mute its other 

audio outputs automatically. You will  need to decrease 

TV volume to zero manually if you wish to hear the 

ARC audio only (same as optical or co-axial digital 

audio outputs). If you want to change connected 

device’s volume level, you should select that device 

from the source list. In that case volume control keys 

are directed to connected audio device.

Note: ARC is supported only via the HDMI2 input.

System Audio Control

Allows an Audio Amplifier/Receiver to be used with 

the TV. The volume can be controlled using the 

remote control of the TV. To activate this feature set 

the 

Speakers

 option in the 

System>Settings>More

menu as 

Amplifier

. The TV speakers will be muted 

and the sound of the watched source will be provided 

from the connected sound system.

Note: The audio device should support System Audio Control 

feature and 

CEC option should be set as Enabled.

E-Manual (if available)

You  can  find  instructions  for  your TV’s  features  in 

the E-Manual. 

To use E-Manual, press to the 

Info 

button while main 

menu is displayed on the screen or press 

Quick Menu

button, select 

Information

Booklet

 and press 

OK

.

By using the directional buttons select a desired 

category. Every category includes different topics. 

Select a topic and press 

OK

 to read instructions.

To close the E-Manual screen press the 

Exit

 or 

Menu

button.

Note: The contents of the E-Manual may vary according to 

the model.