30
Using the TV’s features (General)
Other feature settings
Activating Blue Screen
With the
Blue Screen
function
On
, the screen will
automatically turn blue and the sound will be muted when
no signal is being received�
1
From the
Preferences
menu, press
s
or
r
until
Blue Screen
is selected�
2
Press
v
or
w
to select
On
or
Off
�
Activating 4:3 Stretch
When
4:3 Stretch
is activated, the size switching system
changes 4:3 programmes into full screen picture�
1
From the
Display Settings
menu, press
s
or
r
to
select
4:3 Stretch
�
2
Press
v
or
w
to select
On
or
Off
�
Panel Lock
Panel Lock
disables the buttons on the TV� All buttons
on the remote control can still be used�
1
From the
Preferences
menu, press
s
or
r
to until
Panel Lock
is select�
2
Press
v
or
w
to select
On
or
Off
�
Note:
When
Panel Lock
is
On
, a reminder will appear
when the buttons on the TV are pressed. If the
standby button is pressed, the TV will switch off and
can only be brought out of standby by using the
remote control.
Setting Automatic Power Down
The TV will automatically turn itself off (standby) after
approximately 4 hours, if you do not operate the control
buttons on the remote control or on the TV control panel�
1
From the
Preferences
menu, press
s
or
r
until
Energy Saving Settings
is selected and press
OK
�
2
Press
s
or
r
to select
Automatic Power Down
,
press
v
or
w
to select
On
or
Off
and press
EXIT
�
Notes:
•
This feature is set to
On
when
Location
is set to
Home
.
•
1 minute before switching to standby, a warning
message will appear.
•
The TV will automatically turn itself off after
approximately 1 hour if you do not operate the TV
(after turned on by
On Timer
).
Setting No Signal Power Down
The TV will automatically turn itself off after 15 minutes
when no signal is detected. You can change the setting to
Off for the following purposes:
• Low signal strength of analog channel (no signal
detection)
• Only Audio L/R is connected to an external input in
order to listen to music through the TV speakers�
1
From the
Energy Saving Settings
menu, press
OK
�
2
Press
s
or
r
to select
No Signal Power Down
and press
OK
�
3
Press
s
or
r
to select the item you want to change,
and press
v
or
w
to select
On
or
Off
�
Notes:
•
Default setting is all
On
.
•
A warning message will appear 1 minute before
turning off.
Viewing 3D images
Before using the 3D function, see the
following
Other than compatible 3D glasses, viewing 3D
programming requires the following (which are not
included):
• Compatible 3D playback device or 3D source.
• 3D capable HDMI cable.
If you want to obtain extra 3D glasses:
Toshiba provides additional 3D glasses and can be
obtained from:
For Australia www�shoptoshiba�com�au
* As of April 2011�
About the 3D glasses
•
Do not repair, modify, or disassemble the 3D
glasses by yourself.
Doing so may cause you to become indisposed while
watching 3D images�
•
Do not use the 3D glasses if they are cracked,
broken, or not working properly.
Continuing to use them in such a state may cause injury,
eye strain, or indisposition�
•
Do not stand or walk while wearing 3D glasses.
You may lose your balance which could result in falls or
other accidents�
•
Do not wear the 3D glasses for any purpose
other than viewing 3D programming.
Not for use as sunglasses�
110809c1_47VL800A_En.indb 30
11.8.9 12:59:24
