28
Using the
TV’
s Features
INPUT DISPLAY
INPUT DISPLAY
Locking the video inputs
With the VIDEO LOCK feature, you can lock out the input sources
(VIDEO-1~3, ColorStream HD-1/2, HDMI-1/2, PC) and channels 3 and
4. You will not be able to select the input sources with the INPUT button
or Channel Number buttons unless you clear the setting.
To set up the video lock:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the LOCKS menu.
3. Press
▲
or
▼
to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
5. Press
▲
or
▼
to highlight VIDEO
LOCK.
6. Press or to select:
• OFF:
Unlocks all video input
sources.
• VIDEO:
Locks VIDEO-1~3,
ColorStream HD-1/2, HDMI-1/2,
PC.
• VIDEO +:
Locks VIDEO-1~3, ColorStream HD-1/2, HDMI-1/2,
PC, channel 3 and channel 4. This option should be used if you
use the antenna terminal to play a video tape.
7. Press EXIT to return to normal viewing.
To unlock the video inputs:
Select OFF in step 6, above.
Note:
After programming VIDEO LOCK, change
channels or press INPUT before turning off
the television.
L O C K S
L O C K
C H L O C K
V I D E O L O C K
O F F
O F F
/ V I D E O / V I D E O +
S E L E C T
A D J U S T
Menu/Enter
Exit
Channel
Numbers
Input
Locking channels
With the CH LOCK feature, you can lock specific channels. You will not
be able to tune locked channels unless you clear the setting. You can
choose to lock up to nine TV channels and nine cable channels.
1. Press TV to select the TV mode.
2. Use the Channel Number buttons (0-9 and 100) to display the
television channel you wish to lock.
3. Press MENU, then press or to display the LOCKS menu.
4. Press
▲
or
▼
to display the password entering mode.
5. Use the Channel Number buttons
(0-9) to enter your password, then
press ENTER. The LOCKS menu
appears.
6. Press
▲
or
▼
to highlight CH LOCK
and press to display the CH LOCK
menu.
7. Press or to select the following:
• SET:
to set the channel as one to be
locked. Then press ENTER.
• CLEAR:
to clear all channels from
the list of locked channels. Then
press ENTER.
8. Repeat steps 1 through 7 to lock other channels. When you are
finished locking channels, press EXIT to return to normal viewing.
If you try to tune a locked channel, the TV will not display it, but will
display the nearest unlocked channel.
To unlock channels:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the LOCKS menu.
3. Press
▲
or
▼
to display the password entering mode.
4. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
5. Press
▲
or
▼
to highlight CH LOCK and press to display the
CH LOCK menu.
6. Press or to highlight CLEAR and clear all channels from the
list of locked channels. Press ENTER.
7. Press EXIT to return to normal viewing.
Note:
After programming CH LOCK, change
channels before turning off the television.
Menu/Enter
Exit
Channel
Numbers
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
TV
TV
L O C K S
L O C K
C H L O C K
V I D E O L O C K
O F F
S E L E C T
A D J U S T
C H L O C K
: C H
2
S E T
/ C L E A R
T V C A B L E
2
0
0
0
0
0
0
0
0
R E T U R N
S E L E C T
A D J U S T
E N T E R : S E T
3X80501A_En_p26-31
3/7/06, 3:51 PM
28
