114
Advanced features
Easy Setup using PBC (Push button configuration)
1
Press the
SETUP
button.
2
Select
Network
>
Network Setup
>
Wireless Setup
and press the
OK
button
3
Press the
p
/
q
(arrow) buttons to select
Easy Setup
and press the
OK
button.
4
Press the
p
/
q
(arrow) buttons to select
PBC
.
5
Press the
q
(arrow) button to select
Start Scan
, and then press the
OK
button.
6
Following the on-screen instructions, push the appropriate button on
your AP.
7
When a screen reporting that “the setup has succeeded” appears,
press the
OK
button.
To cancel searching for the AP:
❖
Press the
BACK
button while searching for the AP. A message
appears. Press the
t
/
u
(arrow) buttons to select
Yes
, and then press
the
OK
button.
Easy Setup using PIN (Personal Identification Number)
1
Press the
SETUP
button.
2
Select
Network
>
Network Setup
>
Wireless Setup
and press the
OK
button.
3
Press the
p
/
q
(arrow) buttons to select
Easy Setup
and press the
OK
button.
4
Press the
p
/
q
(arrow) buttons to select
PIN
.
5
Press the
q
(arrow) button to select
Start Scan
, and then press the
OK
button.
The Scan screen appears.
6
Enter the PIN displayed on this screen into your computer or AP.
7
Press the
p
/
q
(arrow) buttons to select the desired AP, and then
press the
OK
button.
NOTE
Check the MAC address on the label or in the manual of the AP and select
an AP.
8
When a screen reporting that “the setup succeeded” appears, press
the
OK
button.
Setting up the Network
