Advanced features
117
NOTE
Settings are not saved if the
BACK
button is pressed before Done is
selected.
Wireless Information
The settings configured in Wireless Setup can be confirmed.
1
Press the
QUICK
button.
2
Select
Wireless Information
, and then press the
OK
button.
3
Press the
RED
button to check the availability of surrounding APs.
A Wireless Information screen appears when a connection is
successfully made.
Item:
Description:
Status
The message, “Connected” appears when the TV is connected to
the AP
The message, “Disconnected” appears when the TV is disconnected
from the AP
Signal
Connection signal strength with the AP (STRONG/MEDIUM/WEAK)
Speed
The link speed with the AP
Mode
Working mode (11a, 11b, 11g, 11n)
Channel
The channel in use (1-165)
Network name
SSID set
Authentication
Authentication set
Encryption
Encryption set
Security key
Security Key set
AP MAC address
The AP’s MAC address appears when the TV is connected to the AP
TV MAC address
The TV’s MAC address
DHCP
The message, “Enabled” appears when you use DHCP.
The message, “Disabled” appears when you do not use DHCP.
IP address
The TV’s IP address
Subnet Mask
Value of the Subnet Mask
Default Gateway
Default GATEWAY’s address
DNS
DNS’s address
NOTE
Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or
TKIP, the Speed value might be low. We recommend that the Encryption
setting are changed to AES (Under manual setup).
Setting up the Network
