34
Connecting Your TV
To control the device(s):
Point the TV remote control toward the front of the TV and press the
button for the desired function. The signal passes from the remote
control through the TV to the device via the IR Blaster cable. For more
information, see
“Setting the IR Blaster” on page 58
.
(Sample Illustration) Controlling the device(s) - remote control
NOTE
The IR pass-through feature does not support all IR controlled devices.
Satisfactory quality may not be attainable with certain devices.
If you cannot locate the device’s infrared sensor:
1
Turn off the device.
2
Starting at the device’s lower-left corner, place the end of the
device’s remote control (with the infrared emitter) so it touches the
front of the device. Press the
POWER
button.
(Do not use the TV’s remote control for this step.)
3
If the device turns on, the sensor is located where the remote control
touched the device.
4
If the device does not turn on, move the remote control slightly to
the right and press the
POWER
button again.
5
Repeat the previous steps if necessary.
Connecting remote IR devices
