Basic features
83
NOTE
These functions depend on the connected devices.
The HDMI
™
CEC Device Control item is not available under the following
conditions:
❖
A non-HDMI
™
input is selected
❖
The
Enable HDMI CEC Control
item is set to
Off
❖
The connected HDMI
™
CEC device is not a playback, recording, or
tuner device
HDMI
™
CEC Control input source selection
If an HDMI
™
CEC device with HDMI
™
switching capability (e.g. an
amplifier) is connected to the HDMI
™
input, you can select another
HDMI
™
CEC device that is connected to the master HDMI
™
device.
Use the
INPUT
button on the remote control or the control panel, see
“Learning about the remote control” on page 50
.
Adjusting the amplifier’s audio
Using the TV’s remote control, you can adjust or mute the sound volume
of your audio system.
❖
The
VOL
(
+ -
) buttons adjust the volume level.
❖
The
MUTE
button turns off the sound.
1
Press
SETUP
button.
2
Select
Options
>
HDMI CEC Control Setup
and press the
OK
button.
3
Press the
p
/
q
(arrow) buttons to select
Initial Speaker Setting
and press the
OK
button.
4
Press the
p
/
q
(arrow) buttons to select
Amplifier
.
NOTE
Confirm that a connected HDMI
™
CEC device (such as DVD player, etc.) is
selected for the Amplifier input source.
NOTE
❖
You can also use this function when the audio system is connected to
the TV’s DIGITAL AUDIO OUT terminal (not HDMI
™
connection).
Select a digital audio input mode on the amplifier.
❖
These functions depend on the device connected.
Using HDMI
™
CEC Control