Picture and Sound Controls
107
Selecting the optical audio output format
You can select the optical audio output format when you connect a
Dolby
®
Digital decoder or other digital audio systems to the TV’s
DIGITAL AUDIO OUT terminal.
Audio Format
1
Press the
SETUP
button.
2
Select
Sound
>
Digital Audio Output
>
Audio Format
and press
the
OK
button.
3
Press the
p
/
q
(arrow) buttons to select
Auto
or
PCM
.
4
Press the
EXIT
button.
Audio Delay
1
Press the
SETUP
button.
2
Select
Sound
>
Digital Audio Output
>
Audio Delay
and press the
OK
button.
3
Press the
p
/
q
(arrow) buttons to select
Auto
or
Manual
.
Auto:
This mode automatically adjusts the audio timing to meet
the video timing.
The time lag might be large between the image and sound
depending on the connected equipment (amplifier etc.). In
that case, select Manual.
Manual:
You can manually adjust the audio signal timing to meet
the video signal timing.
4
Press the
EXIT
button.
Delay Adjustment
1
Press the
SETUP
button.
2
Select
Sound
>
Digital Audio Output
>
Delay Adjustment
and
press the
OK
button.
3
Press the
t
/
u
(arrow) buttons to adjust the audio signal timing (0 –
250ms) to meet the video signal timing.
4
Press the
EXIT
button.
NOTE
❖
This feature is grayed out when
Audio Delay
is in
Auto
.
❖
A time lag will occur when the video signal or audio signal is changed.
Adjust the timing accordingly.
❖
When adjusting the timing, turn down the volume of the AV equipment
used as far as possible.
Adjusting the audio