Setting up your TV
67
4
To view the programmed channels, press the
CH
p
/
q
buttons.
Manual Tuning
After storing channels in memory, you can manually enter channels if the
channel number is known.
1
Press the
SETUP
button.
2
Select
Installation
>
Channel Tuning
>
Manual Tuning
, and then
press the
OK
button.
3
Use buttons 0–9 on the remote control to enter the channel number
(for example, 56).
4
Press the
OK
button.
5
Press the
OK
button again to begin Manual Tuning.
The channels found are listed at the bottom of the screen.
Option:
Description:
ATV
Analog channel
DTV
Digital channel
Skipping channels
To prevent a channel from being viewed, you can set it to be skipped.
1
Press the
SETUP
button.
2
Select
Options
>
Channel Options
and then press the
OK
button.
The list of channels appears.
ATV
DTV
ATV
ATV
DTV
DTV
DTV
Channel Options
101 - 201
201
101 - 201
201
101 - 201
201
101 - 201
Label
CH-1
CH-2
Ch
Type
(Sample Image) Channel options
3
Press the
t
/
u
(arrow) buttons to select the Skip column (
8
) and
press the
p
/
q
(arrow) buttons to select a channel to skip.
4
Press the
OK
button.
The box is selected.
5
To clear the selection, press the
OK
button.
Skipping channels
