background image

Intr

oduction

Connecting

y

our T

V

Using the

Remote Contr

ol

Setting up

y

our T

V

Using the T

V

’s

F

eatur

es

Appendix

Index

12

Programming the remote control for use with a
VCR or a cable TV converter

The remote control provided with your TV is preprogrammed to
operate Toshiba brand VCRs. You can program your TV remote
control to operate other brands of VCRs and cable TV converters
as well.

To program your TV remote control to operate non-Toshiba VCRs
and cable TV converters:

1. Refer to the VCR and cable TV converter code tables on pages 13

and 14 to find the corresponding code for your VCR or converter
brand.
If more than one code is listed, try each one separately until you
find the one that works.

2. Turn on the device (VCR or converter) whose code you are

programming.

3. Press the corresponding device button (VCR or CABLE) and the

ENT button at the same time. The device button will light up,
indicating that it is in the program mode. Perform steps 4 and 5
while the button is lighted (about 20 seconds).

4. Point the remote control toward the VCR or converter, and press

the Channel Number buttons to enter the three-digit code for
your VCR or converter brand.

• If the correct code was entered, the VCR or converter will

turn off.

• If the VCR or converter does not turn off, repeat steps 1–4

using another code.

When the correct code is entered, the lighted button will blink.

5. Press the corresponding device button (VCR or CABLE) to

release the program mode.

6. Press TV to control the TV.

For future reference, write down the code numbers you used:

VCR code

_____________________

Cable code

_____________________

Note:

• Each time you replace the batteries, you

must reprogram the remote control.

• Some newer VCRs are capable of working

on either of two remote codes. These VCRs
have a switch labeled “VCR1/VCR2.”

If your VCR has this kind of switch and
does not respond after programming any of
the codes for your VCR brand, set the
switch to the other position (VCR1 or
VCR2) and reprogram the remote control.

MUTE

RECALL TV/VIDEO SURROUND

CH RTN

ADV

ADV

+

FAV

C.CA

PT

RESET

EX

IT

-

FAV

VOL

CH

ENTER

1

4

7

2

5

8

3

6

9

0

100

TV

VCR

MENU/

TIMER

POWER

ENT

CABLE

MTS

POWER

Channel
Number

Channel 

▲▼

Device buttons

ENT

Summary of Contents for 55A10
















































Reviews: