background image

English

   - 18 -

General TV Operation

Using the Channel List

The TV sorts all stored stations in the 

Channel List

You can edit this channel list, set favourites or set 

active stations to be listed by using the 

Channel List

 

options. Press the 

OK

/

TV

 button to open the 

Channel 

List

. You can filter the listed channels by pressing the 

Blue

 button or open the 

Edit Channel List

 menu by 

pressing the 

Green

 button in order to make advanced 

changes in the current list.

Managing the Favourite Lists

You can create four different lists of your favourite 

channels. Enter the 

Channel List

 in the main menu 

or press the 

Green

 button while the 

Channel List

 

is displayed on the screen in order to open the 

Edit 

Channel List

 menu. Select the desired channel on 

the list. You can make multiple choices by pressing 

the 

Yellow

 button. Then press the 

OK

 button to open 

the 

Channel Edit Options

 menu and select 

Add/

Remove Favourites

 option. Press the 

OK

 button 

again. Set the desired list option to 

On

. The selected 

channel/s will be added to the list. In order to remove  

a channel or channels from a favourite list follow the 

same steps and set the desired list option to 

Off

.

You can use the 

Filter

 function in the 

Edit Channel 

List

 menu to filter the channels in the 

Channel list 

permanently according to your preferences. Using this 

Filter

 option, you can set one of your four favourite 

lists to be displayed everytime the 

Channel list

 is 

opened. The  filtering  function  in  the 

Channel list

 

menu will only filter the currently displayed 

Channel 

list

 in order to find a channel and tune in to it. This 

changes will not remain the next time the 

Channel 

list

 is opened.

Configuring Parental Settings

The 

Parental Settings

 menu options can be used to 

prohibit users from viewing of certain programmes, 

channels and using of menus. These settings are 

located in the 

System>Settings>Parental

 menu.

To display parental lock menu options, a PIN number 

should be entered. After coding the correct PIN 

number, 

Parental Settings

 menu will be displayed.

Menu Lock:

 This setting enables or disables access 

to all menus or installation menus of the TV. 

Maturity Lock:

 If this option is set, TV gets the 

maturity information from the broadcast and if this 

maturity level is disabled, disables access to the 

broadcast.

Note: If the country option in the First Time Installation is 

set as France, Italy or Austria, 

Maturity Lock’s value will be 

set to 18 as default.

Child Lock:

 If this option is set to 

ON

, the TV can only 

be controlled by the remote control. In this case the 

control buttons on the TV will not work.

Internet Lock:

 If this option is set to 

ON

, the open 

browser application in the portal will be disabled. Set 

to 

OFF

 to release the application again.

Set PIN:

 Defines a new PIN number. 

Default CICAM PIN:

 This option will appear as greyed 

out if no CI module is inserted into the CI slot of the 

TV. You can change the default PIN of the CI CAM 

using this option. 

Note: Default PIN can be set to 0000 or 1234. If you have 

defined the PIN(is requested depending on the country 

selection) during the 

First Time Installation use the PIN that 

you have defined.
Some options may not be available depending on the model 

and/or on the country selection in the 

First Time Installation.

Electronic Programme Guide (EPG)

Some channels send information about their 

broadcast schedules. Press the 

Epg

 button to view 

the 

Programme Guide

 menu.

There are 3 different types of schedule layouts 

available, 

Timeline Schedule

List Schedule

 and 

Now/Next Schedule

. To switch between them follow 

the instructions on the bottom of the screen.

Timeline Schedule

Zoom (Yellow button):

 Press the 

Yellow

 button to 

see events in a wider time interval.

Filter (Blue button): 

Views filtering options.

Select Genre (Subtitles button): 

Displays 

Select 

Genre

 menu. Using this feature, you can search the 

programme guide database in accordance with the 

genre. Info available in the programme guide will be 

searched and results matching your criteria will be 

highlighted.

Options (OK button):

 Displays event options.

Event Details (Info button):

 Displays detailed 

information about selected programmes.

Next/Prev Day (Pro/- buttons): 

Displays 

the programmes of previous or next day.

Search (Text button):

 Displays 

Guide Search

 menu.

Now (Swap button):

 Displays current event of the 

highlighted channel. 

(this button is not present on the 

remote CT-8053)

List Schedule(*)

(*) In this layout option, only the events of the highlighted 

channel will be listed.

Prev. Time Slice (Red button):

 Displays the 

programmes of previous time slice.

Next/Prev Day (Pro/- buttons): 

Displays 

the programmes of previous or next day.

Event Details (Info button):

 Displays detailed 

information about selected programmes.

Filter (Text button): 

Views filtering options.

Next Time Slice (Green button): 

Displays the 

programmes of next time slice.

Options (OK button):

 Displays event options.

Summary of Contents for 55U6663DA



































Reviews: