Initial Setup and Menu
59
Performing the initial setup
If some channels are not found after scanning:
❖
Check the antenna/cable connections, and scan again.
❖
Connect the TV to the antenna or cable box directly and scan again.
1
Press the
SETUP
button. Select
Installation
>
Quick Setup
and press the
OK
button.
A confirmation message appears.
2
Select
Yes
then press the
OK
button.
3
Repeat setup to step
6
(Channel Tuning).
❖
If you selected
Antenna
previously, selecting
Cable
might be effective.
❖
If you selected
Cable
previously, selecting
Antenna
might be effective.
4
Select
Start Scan
.
7
IR Blaster
Select
Next
or
Skip
.
❖
To start the IR Blaster setup, select
Next
on the screen, or to
skip the setup, select
Skip
. If you skip this setup, you can setup
the IR Blaster at any time through the
Installation
>
IR Blaster
Setup
menu.
NOTE
The IR Blaster may not work with some devices, and it may not control
certain features on your external devices.
Setting the IR Blaster
IR Blaster Setup
1
Select
Add
on the screen.
Device Type
screen will appear.
Device Type
1
Select
Device Type
, and use the
t
/
u
(arrow) buttons to select
a device type from the following:
❖
Cable Box
❖
Satellite Box
❖
VCR
❖
Blu-ray, DVD Player
❖
Receiver, Misc Audio
❖
Amplifier
