62
Initial Setup and Menu
Volume Control
1
Use the
t
/
u
(arrow) buttons to set up the Volume control to
select:
❖
TV
(this is the default)
❖
External
The
or –
and
MUTE
buttons will control the
External equipment through the IR blaster.
2
Press the
OK
button.
Press the
OK
button on the IR Blaster Setup complete screen.
Support Information
screen will appear.
Guide Preferences
1
Use the
t
/
u
(arrow) buttons to set up the Guide preferences
to select:
❖
TV MediaGuide
❖
External Device Guide
2
Press the
q
(arrow) button to select
Interval Time
.
❖
0.125 sec
❖
0.25 sec
❖
0.375 sec
❖
0.5 sec
❖
0.625 sec
❖
0.75 sec
❖
0.875 sec
❖
1 sec
❖
After the interval time is selected, press the
RED
button to
show the
Test
screen. The test will start automatically.
3
Press the
OK
button.
Press the
OK
button on the IR Blaster Setup complete screen.
Support Information
screen will appear.
8
Support Information
Read through the information, and press the
OK
button.
❖
The initial setup is completed.
NOTE
Refer to this information if there is a problem and you need to contact
Customer Support. To find help, the following operation can be performed
at any time.
SETUP
button >
Get Help
>
System Information
>
OK
button.
Performing the initial setup
