Basic features
97
Using your computer with the TV
Adjusting the image
If the edges of the picture are hidden, readjust Horizontal Position and
Vertical Position. If the picture is affected by interference, readjust Clock
Phase and Sampling Clock.
1
Select
PC input mode
“Selecting the video input to view” on
2
Press the
SETUP
button.
3
Select
Picture
>
Display Settings
and press the
OK
button.
4
Press the
OK
button.
5
Press the
p
/
q
(arrow) buttons to select
PC Settings
, and then
press the
OK
button.
NOTE
If a computer is not connected or there is no PC input signal, this menu will
not be available.
6
Press the
p
/
q
(arrow) buttons to select an item and press the
OK
button.
7
Press the
t
/
u
(arrow) buttons to make adjustments.
NOTE
The screen is disrupted momentarily when adjusting the PC settings.This is
not a sign of malfunction.
Mode:
Description:
Adjustment Range
Horizontal Position
Moves the picture left/right
Within ±10 from center*
Vertical Position
Moves the picture up/down
Within ±10 from center*
Clock Phase
Helps to reduce noise and sharpen
the picture
Within ±32 from center*
Sampling Clocks
Helps to reduce noise and minimize
periodic vertical stripes on the screen
Within ±5 from center*
* The default settings and/or adjustment ranges vary depending on the input signal
format.
To reset the PC Settings:
Select
Reset
, and then press the
OK
button.
Viewing the HDMI
™
signal information
