122
Picture and Sound Controls
Adjusting the audio
Using Audyssey EQ
®
for Wall Mounted or Table-top TVs
This feature automatically keeps the volume at the perfect level for
television mounted on a wall or located on a table-top.
1
Press the
SETUP
button.
2
Select
Sound
>
Audyssey Premium Television
>
TV Mounting
and press the
OK
button.
3
Press the
p
/
q
(arrow) buttons to select
Wall
or
Table
.
Using Audyssey Dynamic Volume
®
This feature provides a consistent sound volume between television
programs, commercials, and between the loud and soft passages of
movies.
1
Press the
SETUP
button.
2
Select
Sound
>
Audyssey Premium Television
>
Dynamic
Volume
and press the
OK
button.
3
Press the
p
/
q
(arrow) buttons to select
Night
,
Day
, or
Off
.
NOTE
❖
If
Dynamic Range Control
is set to
On
, this feature is automatically
set to
Off
.
❖
This feature does not affect the audio signal output from the DIGITAL
AUDIO OUT terminal.
Audyssey ABX™
Audyssey ABX™ technology uses sophisticated driver analysis and low
frequency monitoring to extend the range and bass of small speakers.
To turn on Audyssey ABX™:
1
Press the
SETUP
button.
2
Select
Sound
>
Audyssey Premium Television
>
Audyssey ABX
and press the
OK
button.
3
Press the
p
/
q
(arrow) buttons to select
Off
,
Low
, or
High
.
Audyssey EQ
®
and Audyssey Volume Extension
®
are default settings that
are set to
On
.
Using the surround sound feature
Surround settings help to create a thrilling surround sound experience
with deep, rich bass from stereo sound sources. Your TV’s audio will
sound fuller, richer, and wider.
❖
Press the
SETUP
button.
Select Sound
>
Surround
, and then
select
On
or
Off
.