58
Initial Setup and Menu
Performing the initial setup
2
Select
Media Renderer
, and select
On
or
Off
from the sub
menu.
When
On
is selected, the Media Renderer function can be
used.
3
Select
Next
.
6
Channel Tuning
Select
Antenna
or
Cable
, and select
Start Scan
.
Auto Tuning will start.
While scanning is in progress, the
Auto Tuning Progress
screen
appears.
NOTE
If you do not want to scan channels, you do not need to make a selection
for
Channel Tuning
. Select
Skip
to skip this step.
NOTE
If you want to stop scanning, pressing the
EXIT
button while scanning is in
process.
While scanning is in progress, the
Auto Tuning Progress
screen
appears.
After scanning is complete, the auto tuning results screen (such as
the one below) will appear.
ATV
ATV
ATV
ATV
DTV
DTV
DTV
Auto Tuning (Antenna)
Antenna Channels Found: 13
Ch.
101 - 201
201
101 - 201
201
101 - 201
201
101 - 201
201
Type
RF Ch.
0
11
22
33
44
55
66
77
(Sample Illustration) Auto Tuning Results screen
Press the
OK
button.
NOTE
The encrypted channels are not listed on the auto tuning result screen.
