188
If Something Goes Wrong
Keyboard problems
Keyboard problems
To capture a print screen of the entire screen, press the
Fn + PRTSC
key.
To capture only the active window displayed, press
Fn + ALT
while
simultaneously pressing the
PRTSC
key.
If, when you type, strange things happen or nothing happens, the
problem may be related to the keyboard itself.
You have connected an external keyboard and the operating
system displays one or more keyboard error messages.
You may need to update your keyboard driver. Refer to the
documentation that came with the keyboard or to the keyboard
manufacturer's Web site.
The keyboard you connected may be defective or incompatible with
the computer. Try using a different make of keyboard.
Display problems
Here are some typical display problems and their solutions:
The screen is blank.
Display Auto Off may have gone into effect. Press any key to
activate the screen.
You may have activated the instant password feature by pressing
Fn
and
F1
simultaneously. If you have registered a password, press
any key, type the password and press
Enter
. If no password is
registered, press any key. The screen reactivates and allows you to
continue working.
If you are using the built-in screen, make sure the display priority is
not set for an external monitor. To do this, press
Fn
and
F5
simultaneously (once). If this does not correct the problem, press
Fn
and
F5
simultaneously again to return the display priority to its
previous setting.
HINT: Holding the
Fn
key and pressing the
F5
key several times will
advance you through the display options.
If you are using an external monitor:
❖
Check that the monitor is turned on.
NOTE
