57
Getting Started
Adding memory (optional)
5.375 x 8.375 ver 2.3
6
Using a small Phillips screwdriver, unscrew the screw
that secures the memory module slot cover.
(Sample Illustration) Unscrewing the memory module slot
cover
7
Remove the memory module slot cover.
8
Place the screw and the cover in a safe place so that you
can retrieve them later.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
9
Carefully remove the new memory module from its
antistatic packaging, without touching its connector.
The computer contains two memory slots. You can insert
the module into any available slot.
10
Locate an empty memory slot.
Front of computer
