17
3 Depending on locations of the bubble in the horizon-
tal level indicator, place caps and lock legs (Make sure
to fix adjusta
ble legs.)
•
Mount the leg caps on
the right-hand legs.
Rotate the height adjust
legs to perform height
adjustment.
4 Hold down the diagonal line of the washing machine
and make sure that no ratting occurs.
•
Despite the fact that the bubble is inside the circle, the
ratting exists.
Then shaking motion
becomes larger or
some abnormal noise
comes out. Make sure
to readjust in
case the washing
machine rattles.
Leveling the washing machine
When adjusting the legs, supports the top of the machine. Do not support the machine bottom.
1
Adjust the legs so that the ma
chine does not move.
Note: After adjustment, lock the
nuts of the legs by rotating them in
the direction of the arrow. Make
sure so that the bottom of the main
body front does not reach the
flo
or.
If the bottom is in touch with the
flo
or, then it will be the cause of
shaking and abnormal noise.
2 Check the position of the air bubble in the
floor
level
indicator.
•
If the bubble is not positioned inside the circle, adjust
the height by rotating the leg caps.
(Ex) The washing machine is
tilted towards the right.
Tighten nuts of
adjustable legs
and lock them.
Height adjusting leg
Unlock
Lock
Up
Down
Note: Check the
floo
r level
indicator directly from above.
Standard point
Bubble
Installing the ground wire
•
Be sure to ground your washing machine when installing. When connecting or disconnecting the ground wire, be sure to
first rem
ove the power plug from the AC socket.
•
In case of the machine with two conductor cord connect the ground wire to a proper ground before plugging the power cord
into the socket.
•
In case of 3-core cord the ground pin in the plug should be connected to the proper point of the socket.
Do not connect the ground wire in any of the following places under any circumstances:
•
Do not connect the ground to gas piping.
There is a danger of fire or
explosion.
•
Do not connect the ground to telephone lines or lightning rods. There are dangerous during thunder or lightning storms.
Also, as underground water pipes are often made of plastic, don’t place grounding rods near them.
INSTALLATION
Installing the ground wire
Tw
o-core fl
e
xi
ble cord
When using the ground terminal
on an AC outlet:
Ensure that the ground wire is securely connected to the ground terminal.
When there is no ground terminal:
•
An optionally available grounding rods is re-commended for use.
The grounding rod should be planted in the dampest ground possible.
