background image

2

WARNING:

 This indicates an important item which incorrect operation may lead to injury.

Never attempt to touch laundry in the spin basket until the motion of the

basket stops completely.

Laundry in the basket may become wrapped around the hand, even when the basket is only

moving slowly.

Use particular caution when children are present.

Never allow children to look into the basket or play around the washing

machine.

Do not place the stand or box near the washing machine.

Children may fall into the tub and get injured or drowned.

Never put your hands in the washer when hot water supply is used.

Never disassemble or modify the machine.

It can cause fire or elect

rical shock or malfunctions that lead to injuries.

Consult the store you bought the machine.

Use proper power source indicated in the rating label of the machine.

It can cause fire or elect

rical shock.

Failure to use a proper power source may result in the electrical outlet becoming excessiv

ely hot, leading to fir

e.

Unplug the power cord from the electrical outlet before attempting to service the washing machine.

Do not handle the power cord with wet hands.

It can cause electrical shock or malfunctions that lead to injuries.

Never use damaged power cord, plugs, or loose socket.

It can cause electrical shock or malfunctions that lead to injur

ies or fir

e.

Do not damage the power cord.

Do not attempt to damage, cut, or modify the power cord, or subject it to excessive bending, pulling, twisting, or binding. Also, do

not yank the metal portion, place heavy objects on the cord, or pinch the cord. Doing so may damage the cord, resulting in 

fire

 or

electrical shock.

Do not install in a bathroom or in area exposed to the strong sunshine.

Doing so may result in electrical shock.

Do not allow water to come into direct contact with the various parts of the outer body.

Doing so may result in electrical shock.

Do not place flamma

ble materials in the basket.

Do not put any kerosene, gasoline, benzene, thinner, alcohol, other 

flamma

ble materials, or the laundry soaked with such materials

in the basket.

It can cause e

xplosion or fir

e.

Wipe away any buildup of dust or grime on the prongs of the power plug.

Buildup of dust or grime ma

y cause fir

e.

Do not c

lose the fire on plastic pa

rts.

It can cause fir

e.

Make sure that water drains properly.

Using the washing machine with faulty drainage may cause water to back up within the machine, leading to electrical shock or 

re.

WARNING

Summary of Contents for AEW-1170S





















Reviews: