6
HOW TO OPERATE
Preparation For Model AEW-9770SUP & AEW-1170SUP
Preparation For Model AEW-9770S & AEW-1170S
1
Set pump drain hose for drain. (maximum height should be 1.2 m from
floor)
2
Set the water supply hose correctly. (Ref
er to page 18)
3
Turn the water faucet on.
•
Make sure that there are no sign of water leakage at water tap or inlet
valve.
4
Connect the power plug.
“REGULAR” “HEAVY WASH” “HEAVY RINSE” “SOAK”
“REGULAR” cycle
Water level, water current and time are auto-
matically selected according to the quantity
and type of laundry detected automatically.
Put the laundry evenly and
confi
rmly.
If it is not, the lower water level water may be set.
“HEAVY WASH” cycle
It is especially for heavy soiled clothes.
It washes with stronger water current.
“HEAVY RINSE” cycle
By washing in combination with the
“REGULAR” course, the number of times for
rinsing increases by one turn. When “HEAVY
RINSE: maximum” is chosen, this mode is
memorized. “HEAVY RINSE” illuminates by
turning on the switch from next time.
•
“HEAVY RINSE” provides water supply for
three times. Rinsing process is displayed
by all the lamps illuminating; 1 TIME,
2 TIMES and OVER FLOW
“SOAK” cycle
This method is used to wash clothing which
easily absorbs stain and clothes with
noticeable stains.
•
The time requirement is 1, 2, 3 hour.
•
Rinsing is set to “OVERFLOW RINSE”.
∗
If you add the laundry during washing, be sure to press
button.
After stopping the basket, put the laundry in it.
∗
If the CHILD PROOF mode is set to ON, and the lid is opened while the machine is in operation, the buzzer beeps and the
CHILD PR
OOF indicator flashes then the machine starts d
raining water.
1
Turn the POWER on.
•
“REGULAR” and “CONDENSED BUBBLE” cycles will be selected
automatically.
CONDENSED BUBBLE
The washer starts
fl
owing water at the low level to absorb the concentrated
detergent into the laundry in order to remove the dirt
efficientl
y.
2
Turn the POWER on.
•
The “REGULAR” lamp will light up.
3
Put the laundry in the basket.
•
In case of selecting “SUPER SPIN DRY” cycle, please see page 8 for
details.
4
Press the
button to select “REGULAR” “HEAVY WASH” “HEAVY
RINSE” “SOAK”.
5
Press
button.
•
The pulsator automatically detects the laundry amount, and indicates
the amount of concentrated detergent suitable for the laundry amount.
6
Put in the detergent according to the detergent guide.
7
Close the lid.
•
If you keep the lid opening, the cycle will stop before spin.
•
Avoid y
our finger caught when closing the lid.
Cycle end
The power turn off automatically.
•
A “beep” sound will be heard when operation is
finished.
5
4
6
1
1
2
3
4
1.2 m
1
Set the drainage hose.
2
Set the water supply hose correctly. (Ref
er to page 18)
3
Turn the water faucet on.
•
Make sure that there are no sign of water leakage at water tap or inlet
valve.
4
Connect the power plug.
1
2
3
4