7-
9
. Self-Cleaning function.
Self-Cleaning function is designed to reduce humidity that causes mold to form inside the air conditioning unit.
This advanced, efficient system reduces moisture in the coil. When you turn off your air conditioner, the internal
fan activates and dries the moisture in the coil for 20 minutes, then turns off automatically.
Operation time
•
The Self-Cleaning function is set as default at ex-factory.
•
Self-Cleaning operation can stop manually by press START/STOP botton of the remote
control one more time.
7-
9
-1. How to cancel Self-Cleaning function
To cancel the Self-Cleaning function, proceed as follows:
•
Press TEMPORARY button one time or use remote control to
turn on air conditioner. The OPERATION display will show in
orange color (When AUTO-RESTART is ON) or green color
(When AUTO-RESTART is OFF).
•
Hold down the TEMPORARY button for more than 20 seconds.
(The air conditioner will stop suddenly when the TEMPORARY is
pressed but keep holding it continue. Then will beep 3 times in
the first 3 seconds but it is not related to Self-Cleaning function)
•
A
fter holding about 20 seconds, the air conditioner will beep 5
times without any blinking of display.
•
The Self-Cleaning Operation had been concelled.
Remarks
•
Per setting of Self-Cleaning function above, AUTO-RESTART
function had been cancelled. To set AUTO-RESTART again,
please follow item 7-
7
-1.
7-
9
-2. How to set Self-Cleaning function.
To set the Self-Cleaning function, proceed as follows.
•
Press TEMPORARY button one time or use remote control to
turn on air conditioner. The OPERATION display will show in
orange color (When AUTO-RESTART is ON) or green color
(When AUTO-RESTART is OFF).
•
Hold down the TEMPORARY button for more than 20 seconds.
(The air conditioner will stop suddenly when the TEMPORARY is
pressed but keep holding it continue. Then will beep 3 times is
the first 3 seconds but it is not related to Self-Cleaning function)
•
A
A
fter holding about 20 seconds, the air conditioner will beep
5 times and OPERATION display blinks 5 times.
•
The Self-Cleaning function had been set.
Remarks
•
Per setting of Self-Cleaning function above, AUTO-RESTART
function had been cancelled. To set AUTO-RESTART again,
please follow item 7-
7
-1.
Automatically turn-off.
Turn off by remote controller
or timer-off function.
Cool mode or dry mode
Self-Cleaning mode
operation more than 10 mins.
operate 20 mins.
CDU fan
ON or OFF
OFF
OFF
depend on preseting per room temperature.
Compressor
ON or OFF
OFF
OFF
depend on preseting per room temperature.
Timer display
ON or OFF
ON
ON or OFF
depend on preseting of timer function.
depend on preseting of timer function.
FCU louver
OPEN
CLOSE
CLOSE
ON
OFF
OFF
FCU fan
ON
ON
OFF
rpm is depend on preseting.
rpm is SUL speed.
Operation display
FILE NO. SVM-0
4007-(1)
-
30-(1)
-
