26
Getting Started
Connecting to a power source
Always use the Toshiba USB/AC adaptor that was provided with your
device, or use USB/AC adaptors specified by Toshiba to avoid any
risk of fire or other damage to the device. Use of an incompatible
USB/AC adaptor could cause fire or damage to the device possibly
resulting in serious injury. Toshiba assumes no liability for any
damage caused by use of an incompatible adaptor.
To connect AC power to the device:
1
Connect the USB Power cable to the USB/AC adaptor.
(Sample Illustration) Connecting the USB Power cable to the
USB/AC adaptor.
Handling the cord on this product will expose you to lead, a
chemical known to the State of California to cause birth defects or
other reproductive harm.
Wash hands after handling
.
2
Plug the USB Power cord into the Power/Docking connector
on the bottom of the device.
Do not force the plug into device.
(Sample Illustration) Connecting the AC adaptor cord to the device
_
+
NOTE
GMAD00314010_excite_10LE_ICS_12Apr26.book Page 26 Thursday, April 26, 2012 8:27 PM