background image

10

TUB DRY CYCLE

“TUB DRY” cycle 

can remove all drops of water left in the wash tub/spin basket in order to prevent mold.

You can select two modes of this cycle.

1

  Turn the POWER 

 put the laundry into the tub.

2

 Press 

 button to select course.

 

 

Automatic “TUB DRY” cannot use with

  “SUPER SPIN DRY”

 

mode.

3

 Press 

 button to activate Automatic “TUB DRY” 

cycle.

 

:

 

“AUTO” indicator will light up.

 

Once

 

Automatic “TUB DRY” is set, it is stored in 

 

memory no need to reset every time. When you 

  power on the machine next time, the “AUTO” 
  indicator will light up.

 

Automatic “TUB DRY” can be cancel by press

 

 

 button 

until 

“AUTO” and “MANUAL” lights out.

4

  Close the lid and press 

 button and follow 

the usual operation until fi nishing process.

 

 

The “beep” sound will be heard when spinning is 

 fi 

nished.

 

Close the lid after take out all clothes from the wash 

 tub/spin 

basket.

 

Automatic “TUB DRY” cycle will be started after lid 

  closed 30 min. (the program will check to ensure that 
  tub is empty and lid is closed).

 

Drying tub cycle operate approximatly 30 min.

 

If you want to immediately activate Automatic 

 “TUB 

DRY”, 

press

 

 button after you take 

  out all clothes and close the lid.

 

If have any clothes in wash tub/spin basket or lid 

  open long time 

, automatic  “TUB DRY” cycle will 

 be 

cancel.

Finish Automatic “TUB DRY” cycle

  •

  The “beep” sound will be heard when operation is 

 fi 

nished.

Automatic “TUB DRY”

Automatically drying wash tub/spin basket
after fi nish automatic wash course.

Manual “TUB DRY”

Drying wash tub/spin basket only.

Do not put any clothes in wash tub/spin basket.

1

  Turn the POWER 

 .

2

 Press 

 button to select Manual “TUB DRY” cycle.

 

:

 

“MANUAL” indicator will light up.

 

Others course and mode cannot be select.

3

  Close the lid and press 

 button.

 

 

Please check no cloth in wash tub/spin basket before 

  close the lid.

 

Drying tub cycle operate approximatly 30 min.

Finish Manual “TUB DRY” cycle

  •

  The “beep” sound will be heard when operation is 

 fi 

nished.

NOTICE

  •

  The amount of mold in the wash tub/spin basket is 

  less or much depend on the operation of the washer.

  If there is mold in the wash tub/spin basket, it 

  cannot easily removed by using “TUB DRY” cycle 
  once. Please use this mode one time or more in one 
  week. If mold occur, you should use “TUB 
  CLEAN” course (P.17).

   

   

 

2

1

3

4

1

2

3

  more than 30 min.

Summary of Contents for AW-B1000GM





















Reviews: