12
If you feel the amount of water is less or much
Water level is automatically set
to suit the amount of laundry. If
you feel the amount of water is
less or much, you can adjust it
as the following.
If you feel the amount of water is much.
If you feel the amount of water is less.
Turn the POWER
with pressing the
button.
Adjust by pressing
.
Press twice.
Press once.
Adjust by pressing
.
Press once.
Press twice.
* Set it once, it is written in memory. You don’t have to set it on each laundry.
The contents in ( ) also apply to AW-B1000G.
If you wish to turn off the end buzzer sound
•
You can turn off the buzzer sound by
1
Press
the
button and hold. Then press the
POWER
button. After buzzer beeps 3 times,
the end buzzer disabled.
2
Follow this instruction when you want to reset to
enable the buzzer.
*
After you set the buzzer, the washer will keep the
setting in memory. So it is not necessary to reset
the buzzer every time.
Press
If you wish to change the shower rinse to the static rinse
For the shower rinse, it needs twice for the process. But for the
static rinse, it needs only once.
Press and hold for 3 seconds
1
Press
button to turn on the washer.
2
Press the
button and hold for 3 seconds.
The buzzer sound will be heard and the course
will be set within 5 seconds. After that, turn off the
washer.
•
Follow this instruction for the shower rinse, and
the buzzer sound will be heard.
•
After the setting, the washer will keep the
setting in memory. So it is not necessary to
reset every time.
Press
OPTION MODE
Press and hold
(77L) 79L
(21L) 21L
(77L) 79L
(21L) 21L
(77L) 79L
(21L) 21L
(77L) 79L
(21L) 21L
(77L) 79L
(21L) 21L
[Decrease approx. 10L] [Decrease approx. 5L]
[Increase approx. 10L]
[Increase approx. 5L]
Turn the POWER
[Finished adjusting]
.