16
MAINTENANCE
L
How to remove
Hold the upper side of the cassette fi lter, and push down
and pull it at the same time.
Clean the cassette fi lter at the end of operation.
Cassette fi lter
When it is diffi cult to remove the fi lter case due to lint
attached, wet it with water to soften the lint.
L
How to set in
Hold the fi lter case with its top side up. Put the lower side
of the fi lter case in the fi lter stand, and then push it until a
“click” sound is heard.
L
How to set in
1
Set the fi lter case to the fi lter cover as follows.
2
Press down the fi lter cover case until a “click” sound is heard.
L
When the fi lter valve inside the fi lter cover is
loosened
If the fi lter valve is loosened, lint may not be collected.
1
Set the fi lter valve to the fi lter case while aligning its
concavity and convexity to those of the fi lter case.
Filter slot
Cassette fi lter
Filter cover
Filter valve
Concavity
Filter cover
Convexity
2
Insert the groove of the fi lter valve to the click at the
center of the fi lter cover.
Cassette fi lter
L
How to remove
Turn over the fi lter, and then slide the fi lter case in the arrow
direction of the following fi gure (
1
) to remove it (
2
).
Clean inside the fi lter cover and the fi lter case.
Wipe or Wash out any remaining detergent.
If there is any remaining detergent hard to be removed, use the “TUB CLEAN
” course.
•
Before put detergent or bleach to in the detergent/bleach dispenser, remove water in its inlet.
With any remaining water, detergent may be hardened and attached.
Detergent/Bleach dispenser
Filter case
Groove
Filter cover
Click
Filter case
Removing the case
1
Removal
procedure;
Pull the detergent/softener case toward you, then lift it for
removal.
Remounting procedure
1
Mount the cap of the insertion case. If the washing machine
operates without the cap in place, the softener does not
enter.
2
Lift the case obliquely in the same way as you remove it,
and insert it deeply along the guides.
Guides
Remove the case to clean it. In addition, wipe away any dirt from the water inlet valve.
2
Remove the cap of the detergent/softener case.
3
Clean the case by water. Wipe the insertion case by wet cloth.
Filter cover
Filter case
Cassette fi lter
Softener case /Detergent case (Preset mode)
Cap
Cap