6
HOW TO OPERATE
1
Set drainage hose for draining.
2
Set the water inlet hose correctly.
3
Turn the water faucet on.
•
Make sure that there are no sign of water leakage at water faucet
or/and water inlet valve.
4
Connect the power plug.
6
1
5
3
4
“REGULAR” course
Water level, water current and time are auto-
matically selected according to the quantity and
type of laundry detected automatically.
Put the laundry evenly and confi rmly.
If it is not, the lower water level water may be set.
” course
•
∗
If you add the laundry during washing, be sure to press
button.
After stopping the basket, put the laundry in it.
∗
Lid Lock mode will operate and the
lights up when the machine enters rinsing process (do not open the lid while the
lights up, doing so may damage the lid), please see page 9 for details.
1
Turn the POWER
.
•
“REGULAR” and “CONDENSED BUBBLE” cycles will be selected
automatically.
CONDENSED BUBBLE
The washer starts fl owing water at the low level to absorb the concen-
trated detergent into the laundry in order to remove the dirt effi ciently.
2
Put the laundry in the wash tub.
•
In case of selecting “SUPER SPIN DRY” cycle, please see page 8 for
details.
If “SUPER SPIN DRY” selected, you cannot select “AUTO” TUB DRY.
3
Press
the
button to select “REGULAR” “HEAVY WASH” “
”
”.
4
Press
button then “AUTO” indicator light up, automatic “TUB DRY”
is selected.
AUTOMATIC TUB DRY
This cycle operate by evaporate the water from basket in order to
prevent mold. The program view automatically operate after fi nish
all
process.
Once Automatic “TUB DRY” is set, it is stored in memory no need to reset
every
time.
5
Press
button.
•
The pulsator automatically detects the laundry amount, and indicates
the amount of concentrated detergent suitable for the laundry amount.
6
Put in the detergent into detergent dispenser according to the detergent guide.
•
Please see “Digital Display Unit” on page 4-5 on the detergent guide.
7
Close the lid.
•
If you keep the lid opening, the cycle will stop before spinning.
•
Avoid your fi nger caught when closing the lid.
Cycle end
•
The “beep” sound will be heard when spinning is fi nished.
•
Always close lid after bring washed clothes out of the machine in order to
activate automatic “TUB DRY”.
•
The “beep” sound will be heard when automatic “TUB DRY” is fi nished.
The power turn off automatically.
“REGULAR” “SPEED” “FRAGRANCE”
“FRAGRANCE
“SPEED” course
It is especially for light soiled clothes. It
washes with regular water current mode and
shorter washing time.
SPEED
“FRAGRANCE
This course is to maximize the effect of softener,
which results in perfumed feeling.
The method would be almost same as
SOFTENER MUST BE USED.
“REGULAR” course.
•
DO NOT USE SOFTENER.
(Refer to page 5,13)
Washing Operation :
Washing Operation :
“HEAVY WASH” course
It is especially for heavy soiled clothes.
It washes with stronger water current.
Washing Operation :
Washing Operation :
“HEAVY WASH”
= 8 MIN.
= 2 TIMES.
= 5 MIN.
WASH
RINSE
SPIN
= 4 MIN.
= 1 TIME.
= 5 MIN.
WASH
RINSE
SPIN
= 8 MIN.
= 1 TIME,2 TIMES.
= 5 MIN.
WASH
RINSE
SPIN
= 8 MIN.
= 2 TIMES.
= 5 MIN.
WASH
RINSE
SPIN
